NDT-ED-2 Bench Eddy Current Sorter For Steel Mix Hardness

1.Description:

Eddy Current Sorter is sturdy, light weight and portable test unit with a adjustable handle. Powered from single phase, 220V a.c., 50 Hz source. The unit offers both sine wave and ellipse display. A ten (10) position rotary band switch (frequency from 10 Hz to 10000 Hz), two threshold level controls to set upper and lower limits of acceptance, a phase control to adjust the 10Oto 170O phase of the sine wave.

Three level indicators (Red for upper rejection, Green for acceptance and Blue for lower rejection) to indicate three different groups according to limits of acceptance set, buzzer is provided at rejection mode to alert the operator. An additional indicator (amber) to indicate improper setting or internal fault of instrument by blinking. This machine is for quick fault identification and easy maintenance and has all the components with reliability durability and perfect functioning.

Instrument introduction:

The NDT-ED-2 hardness sorter for steel mixing and material mixing is a fully automatic eddy current testing equipment for hardness sorting of various small thin workpieces. The flaw detector used in the sorter can be compatible with probes of various shapes and sizes, thus bringing a new opportunity for automatic flaw detection of special-shaped workpieces.

Selling points:

1. The probe does not touch the workpiece, which increases the durability of the probe.

2. Continuous detection is available to improve detection efficiency

3. It is easy to operate without changing the probe when detecting different metal parts

4. It has automatic balance to improve the online detection reliability of the instrument

5. Synchronous tracking of waveform display to stabilize defect signal

6. No magnetizing and demagnetizing coil is required, and the equipment is simple and reliable

Commodity attribute:

1. Applicable object: small thin workpiece (bearing ring, etc.)

2. Multi frequency dual channels are used to detect the workpiece (i.e. one driven two)

3. Detection frequency range: 64Hz － 5MHz adjustable

4. Specifications and dimensions: customized according to user requirements

5. Be able to detect ± 1HRC hardness

6. Automatic feeding, automatic sorting, automatic counting and automatic blanking

7. Detection speed 1s/piece (dual channel)

8. Sampling rate4 × 25000 times/second

9. Gain: 0-80db adjustable

10. Phase: 0-360 degrees, adjustable at will, frequency distance is 1 degree

11. Statistics of the total number, qualified number, qualified rate and other functions of the inspected workpieces

12. Industrial control computer and WINDOWS operation platform flaw detection software are used

13. Parts are free of any damage after sorting

14. Power consumption<600W (220V)

Working environment:

Operating temperature: - 15~55 ℃

Storage temperature: - 20~60 ℃

Relative humidity: no more than 85%

Working voltage: AC220 ± 10V