Details of flange coupling

Rigid Flange Coupling has two main structural forms: 1., the hinge is made of bolts to realize the two axle pairs and the bolts are subjected to extrusion and shearing to transmit the torque; 2., the 1.5 shoulders are matched with the grooves on the other 1.5 couplings.

Rigid Flange Coupling can be made of grey cast iron or carbon steel for material. Cast steel or forged steel is used when heavy load or circle speed is greater than 30 m / sec. The Rigid Flange Coupling has a very high demand for two axis neutral. When two axes have relative displacement, they will cause additional loads in the machine parts and make the work worse.

• The transmission torque is large and the transmission is reliable, which can realize the accurate alignment of the driving shaft and the driven shaft
• A variety of connection methods can be applied between shafts and hubs, including key connection, expansion sleeve connection and interference connection
• Flange connection hole is processed by CNC machining center with good compatibility

Advantages of flange couplings
1. The flange coupling is simple in structure, convenient to manufacture, low in cost and reliable in work.
2. Easy to assemble, disassemble, and maintain. The transmission torque is large, which can ensure high alignment accuracy of the two axes.
3. Generally used in shaft drive with stable load, high speed or high transmission accuracy.
Flange couplings do not have radial, axial and angular compensation performance. If the centering accuracy of the two shafts cannot be guaranteed during use, it will reduce the service life, transmission accuracy and transmission efficiency of the coupling, and cause vibration And noise.