FC/SC/LC/ST Fiber Patch cord SM/MM Simplex/duplex cable 0.5M/1M/2M
1) Meets TUV, ISO9001, TLC, EIA / TIA, IEC NTT and bell core GR 326-core standards
2) Superior qualified standard: PC / UPC / APC polishing
3) Φ0.9mm, Φ2.0mm and Φ3.0mm cables are available
4) Single mode (9 / 125) or multimode (50 / 125 or 62.5 / 125) fiber available
5) Simplex / duplex connector available
6) 100% optic test (insertion loss and return loss)
7) Insertion loss: ≤0.2dB (PC), ≤0.2dB (UPC), ≤0.3 (APC)
8) Return loss: ≥45dB (PC), ≥50dB (UPC), ≥65dB (APC), ≥35dB
9) Operation temperature: -40~+85C
10) Customized specifications welcomed Access network and local network in high electromagnetic interfering places.
Optical fiber jumper FC LC ST SC single-mode single-core yellow and white optical fiber pigtail
Optical fiber jumper is used as a jumper from the equipment to the optical fiber wiring link. It has a thicker protective layer and is generally used for the connection between optical transceivers and terminal boxes. It is used in some fields such as optical fiber communication systems, optical fiber access networks, optical fiber data transmission, and local area networks.
Optical fiber jumper (also known as optical fiber connector) means that both ends of the optical cable are equipped with connector plugs to realize the active connection of the optical path; one end with a plug is called a pigtail. Optical Fiber Patch Cord/Cable is similar to coaxial cable, except that there is no mesh shield. In the center is the glass core for light propagation. In a multimode fiber, the diameter of the core is 50 μm to 65 μm, roughly equivalent to the thickness of a human hair. The single-mode fiber core has a diameter of 8 μm to 10 μm. The core is surrounded by a glass jacket with a lower refractive index than the core to keep the fiber inside the core. On the outside is a thin plastic jacket to protect the envelope.