Automatic Carton Box Flexo Printer Slotter Rotary Die Cutter with Vibrator and Auto Stacker Machine High Quality and Good Service

General Specifications

TP-CR Series open & close type flexo folder gluer represents of Quality, Consistency, Efficiency and Economic.

High speed inline top flexo print casemaker with down folding provides a complete carton boxes producing solutions.

The machine is designed and made to high quality and safety standard, stable and consistency high printing quality maximize the production efficiency.

The Photo of Machine

FEEDING SECTION

• Machine clutch

Electric machine control clutch bell, moving last warning bell ring , ensuring the safety of operation personnel.

Drive shaft with a safe clutch to avoid misuse and damage to the machine (the machine is not fixed, the host can not start operation).

Pneumatic interlocking device .

Host motor start up protection device .

• Adsorption leading edge Feeder system

lead edge feeder institution can greatly reduce clogging phenomenon in the process of cardboard paper.

Suction fan auxiliary feeder,make sure the winding paperboard feeding smoothly,The wind volume can be adjusted according to the size of the board.,The maximum guarantee of the vacuum adsorption of cardboard, so that more accurate to send paper.

front baffle and back baffle adopt manual adjust gap, feeder lift-right baffle adopt electric adjust gap.

feeder wheels adopt polyurethane material made,Large friction and long life.

it suitable for 3layers,5layers and 7layers corrugated cardboard, include E flute cardboard.

supply paperboard counter,set-up and Display production quantity.

• dust-extraction unit

Equipped with dust removal mechanism ( remove dust brush ), effectively remove cardboard surface impurities , improve the quality of printing .

• feeding roll

Seamless steel pipe , parcel wear-resisting rubber , correction and balance

Lower feed roller chrome plating.

feeder Paper roll gap dial manual adjustment, adjustment range 0-11mm.

Operation control switch (PLC computer control)

the control panel is equipped with 10 Inch Touch screen, can control the paper feeding, printing, slotting, die cutting, easy to operate.

• Automatic zero return device

Paper feed, printing, slotting, cutting part of the electric automatic return to zero.

In general, the use of automatic paper box to zero device, try to print two can be adjusted to the correct position, reduce waste.

PRINTING SECTION

• printing roller

out diameter is 390mm(include printing plate 405mm).

Steel plate material, surface grinding, hard chromium plating.

Balance correction, smooth operation.

Fixed ratchet wheel shaft.

Full format plate ditch, suitable for 9mm hanging version.

Loading and unloading printing plate, pedal switch electric control positive and negative.

Loading and unloading the printed board, pedal switch electric control positive and negative.

• printing pressure roller

out diameter is 154.3mm

Steel pipe surface grinding, hard chromium plating.

Balance correction, smooth operation.

printing pressure roller gap dial manual adjustment,adjustment range 0-12mm.

Feeder roller gap dial manual adjustment, adjustment range is 0-12mm.

• Uniform Ink Part

Introduction of Ceramic Roller with Ink Scraper System

Ceramic mesh roller with semi-closed scraper.

Scraper system adopts American technology, fine printing, ultra-low loss.

Preventing volatilization is more environmentally friendly.

Ink-touching plate adjustment of reticulated roller, which is pneumatic down-pressing action, automatic hoisting protection device when air stops, while the center of transmission gear remains unchanged.

Micro-adjustment of gap between screen roller and plate wheel.

Automatic induction ink detection system, including warning lights and alarm bells.

Ink pump is a single diaphragm pneumatic pump, which can recover the accumulated water filter and ink circulating system inside and inside the pump.

The cartridge is quickly dismantled and the inner surface is sprayed with Teflon to improve the cleaning efficiency.

Closed cover and recycling ink tank device, easy to clean and leak-proof design.

• Introduction to Scraper

Professional manufacturer to ensure the quality of scraper system.

The scraper inner chamber is sprayed with Teflon material, so that the ink will not adhere to the chamber and is easy to clean.

Single scraper form makes disassembly more convenient. (Double scrapers are available)

Hydraulic propulsion mode, so that the scraper smoothly adheres to the ceramic roller, scraping ink more evenly.

Ink deficiency automatic alarm device to avoid damage to scraper and ceramic mesh roller.

Automatic Cleaning System for Scraper and Ceramic Screen Roll

THE MAIN PARAMETERS:

Rendering of The Product