HJ-1400 Computer High Speed Cross Cutting Machine

HJ-1400 Computer Cross Cutting Machine High Speed With Servo Motor Control 1400mm slitting cutting for a4 paper cutting

Performance and characteristics:

This machine is suitable for cutting large drum packaging materials such as various types of paper, self-adhesive, paper plastic composite, and non-woven fabrics. This machine adopts servo motor control for fixed length cutting. The transmission system adopts centralized control such as pneumatic and photoelectric sensors. This machine integrates light, electricity, and gas, with simple operation, high cutting accuracy, mechanical stability, and low noise. (Optional for pneumatic feeding) Motor variable frequency speed regulation, automatic counting, alarm shutdown, magnetic powder taper automatic tension adjustment function. It is currently an ideal equipment for high-quality large-scale coil cutting in China

Features:

1. Host variable frequency speed regulation, Panasonic PLC touch screen control system, automatic counting, automatic length setting, alarm parking, automatic control and other functions

2. The frame adopts a 16mm steel plate structure, the cross cutting blade seat adopts a heavy cast structure, and the guide roller adopts dynamic balance treatment aluminum alloy guide roller

3. The drive positioning traction adopts a servo system drive shaft structure, and the feeding traction method is motor driven sprocket drive traction rubber shaft

4. This machine is an ideal online cross cutting device with high accuracy and fast speed

1, Main technical parameters:

2. Host part

(5) The rack adopts 16 # high-quality steel plate structure

1) Traction device:

(1) Structural type: active traction passive compression type

(2) The traction base adopts a casting structure (1 set)

(3) The traction roller adopts rubber rollers (specification: 6 pieces) φ eighty-five × 1150mm)

(4) The compression method adopts cylinder control

(5) The transmission guide roller adopts aluminum guide rollers (specification: 12 pieces) φ seventy-five × 1150mm)

(6) The transmission guide roller can be tensioned up and down for adjustment

(7) The motor adopts a three-phase asynchronous variable frequency motor of 1.5KW (Shanghai Dedong) (1 set)

(8) The frequency converter adopts Geetyco 1.5kw (1 unit)

(9) The feeding adopts a floating arm mechanism for material storage and buffering.

(10) The floating up and down tension adopts pneumatic traction method

(11) Floating guide roller: aluminum guide roller (specification: 12 pieces) φ seventy-five × 1150mm)

(12) The entire feeding mechanism is intelligently controlled by displacement sensors.

2) Feeding mechanism:

1. Actively adopt servo control positioning method

4.4kw Inviton servo motor, driver (1 set)

3. The entire industrial control system adopts a digital industrial control system driving method: the main motor drives the active roller positioning

4. The transmission adopts synchronous belt and synchronous wheel transmission mechanism

5. The feeding roller adopts a smooth rubber roller structure

6. Use conveyor belts to transport to the sorting area

3) Cutting device:

(1) Cutting method: lower knife fixed, upper knife active cutting

(2) The cutterbed adopts a cast heavy structure:

(3) Linear guide rail (2 pairs)

(4) Oil container (2 pieces)

(5) Lubricating oil can be recycled

(6) The upper and lower round knives are made of imported balanced steel cutting tools (6 pairs)

(7) Tool (specification thick × wide × Length: 15 × eighty × 1150mm (Shanghai Joint Venture) (2 pairs)

(8) Operation mode: Manually adjust the tool position arbitrarily

(9) Main transmission mode: The main motor transmission is matched with a gearbox to drive the eccentric wheel linkage, and the connecting rod reciprocates to move the cutting tool

(10) The main motor adopts a variable frequency speed control motor in Shanghai (1.5kw)

(11) The frequency converter adopts Geetyco (1.5kw 1 unit)

(12) The transmission adopts a synchronous wheel transmission mechanism

(13) Eccentric wheel (2 sets)

(14) Connecting rod (2 pieces)

(15) Material discharge device; Pneumatic feeding with shaft discharge rack, standard configuration; 1 set of 1100 pneumatic expansion shaft, 2 cylinders 160 * 300, 1 set of 10 kg magnetic powder, 1 set of deviation correction system, totaling 1 set

3. Electrical control part: (Control and host connected in parallel) The entire machine adopts Panasonic PLC industrial control system, and the touch screen is controlled by Taiwan Weilun

(1) The control system of this machine is roughly controlled by the host.

(2) Host control: including main motor control, traction control, feeding control, and cutting control.

(3) Floating control: With a wide speed range, it has good performance at both low and high speeds.

(4) Equipped with an electronic meter counter for counting; Alarm shutdown; Automatic fixed length, point in and point out functions.

(5) The above electrical components are selected from Chint; Switch selected from Schneider brand

4. Supporting facilities: (user responsible)

(1) Power supply: three-phase four wire air switch: voltage 380V/50Hz