HJ 6-1400 model flexo printing machine for kraft paper rolls or non woven fabric

film rolls plastic film rolls

First, the characteristics of Features:

1. From the discharge to the receipt of the short distance.

2. The self-developed special scraper compensates for high-speed flying ink and reduces the volatilization of solvent in the air.

3. Repeated printing length 300-950MM, to fill the blank of the cascading flexo printing machine with insufficient printing length.

4. Adopt computer automatic color registration system, shift automatic tracking compensation, accurate color registration and stable printing.

5. Printing material: OPP: 20~70μm BOPP: 20~60μm PE: 35~100μm NY: 20~50μm PET: 20~60μm CPP: 20~60μm paper: 20~300g/m2 sticker And other materials.

6. The cycle of the plate making process is short and the cost is low. The period of a multi-color gravure cylinder is 5 to 10 days, and the flexographic printing plate is made for 5 hours. The flexographic version depends on the print area and is much less expensive than the gravure cylinder.

7. Pre-press correction, post-press strong wind + infrared drying design, auxiliary cooling bellows. Avoid smudging that is easily caused when the ink is poorly dried.

8. The printing part is driven by high-strength linear guide rail, and the advance and retreat version is driven by linear ball screw + permanent magnet synchronous servo motor,

9.1-6 colors can be customized according to needs, width 1000MM

10. Process 1 discharge, 2 automatic constant tension, 3 scraper, 4 printing unit, computer color, 5 traction, 6 automatic constant tension, 7 center up and down receipt

Technical parameters

1. Printed form : Flexo

2. Printing substrate : paper non-woven film

3. Printing speed: 10m/min-120m/min

4. Mechanical speed: 10m/min-150m/min

5. Maximum width of substrate: 1440mm

6. Printing width: 100-1200mm

7. Printing circumference: 300-950mm

8. Plate thickness: 1.7mm (special advance notice)

9. Anilox roller specifications: Φ106*1440*6

10. Aluminum guide roller specifications: Φ100*1440 Φ70*1440

11. Printing bottom roller: Φ160*1440

12. Unwinding maximum diameter: Φ1200 mm

13. Maximum winding diameter: Φ1200 mm

14. Maximum temperature of large oven: 80 °C

15. Substrate core diameter: 74mm

16. Total power of the whole machine: Motor power 15+7.5kW, electric heating power 48KW

17. Drying heat source: electric heating

18. Machine weight : about 15 T

19. Dimensions : 12800(L) x 2400 (W) x 1150(H)mm

20. Body color : Dark gray + white (special advance notice)

Second, the machine configuration:

Unwinding device:

1) Semi-automatic unwinding device: pneumatic automatic feeding

2) Maximum diameter of unwinding: Φ1000 mm

3) Inflatable shaft specification: 3”

4) Number of inflation shafts: 2

5) Tension control range: 0-100kg/full width

6) Magnetic powder: 10KG, automatic tension control

7) Fully automatic tension detecting device;

8) Analog Correction System 1 set

2. Printing unit

1) Drive mode: geared motor drive, synchronous belt drive.

2) Printing plate shaft:

(1) Longitudinal color registration: permanent magnet servo motor drive (Kosai computer automatic color system execution command)

(2) Horizontal color: motor drive (manual execution)

3) Overall composition: plate roll, scraper, ink tray, anilox roller,

4) Scraper: 4 sets of one-way scraper are used. In order to facilitate the installation, the material of the scraper is made of high-strength aluminum alloy profile, which is convenient and quick to load, unload and clean.

4. Drying device:

1) Each color group is equipped with strong wind + infrared oven drying: with a set of cooling and curing after printing.

2) The overall printing is dried first and then cooled. The oven is electrically heated and the fan is intelligently controlled, and the temperature inside the oven is controllable.

5. Winding device

1) Winding method: Center curling Up and down axis

2) Paper core installation method: Expansion shaft expansion 2

3) Inflatable shaft specification: 3”

4) Winding motor: 7.5KW 1 set

5) Tension control: Fully automatic tension control

6) Winding tension range: 5-10KG/full width

7) Single winding diameter: Maximum Φ1000mm.

Third, supporting facilities (users are responsible)

1. Power supply: 3-phase *380V*50HZ, three-phase west line system

2, air compressor: 2KW (1 set)

Electrical list

Category Major Technical Products Remarks

Machine power

Main machine 15+7.5KW 380V Shanghai A total of 1

Heating 6KW/group Homemade 6 groups

100WX4 wind source

Electric appliance Schneider

Ink roller motor 120W 220V AC Taiwan Total 6groups

Total power about 50KW

Unwinding pressure sensing detection, fully automatic tension control

Magnetic powder brake: Ryan Haitai Torque: 100 Nm

Discharge traction pressure precision pressure regulating valve

Color group

The temperature controller controls the oven temperature at a constant temperature.

Delay control of the ink roller and the mesh roller to achieve a more reasonable requirement for the homogenization.

Plc module

Winding center

PLC Japan Mitsubishi

Progressive version of permanent magnet servo motor 16

Pneumatic automatic feeding

Simulation Correction Coase Company Computer Automatic Color System Cosei

Color permanent magnet servo motor 6

Ceramic stick Anilox roller optional 6

Touch screen 12 inch Taiwan weinew