STM-1200 Semi-Auto Laminator Machine Quotation

5. Features:

1. The whole machine adopts PLC control system, compared with other time delayer or intermediate relay control, the walking paper is more accurate and stable, and greatly improves the speed, the circuit failure can automatically display alarm;

2. Using a CpG motor in Taiwan, the signal conversion control of brake, clutch and low light eye is banned.

3. The base paper adopts the inspiratory automatic walking paper, which can be tracked automatically and continuously according to the speed and continuity of the paper.

4. New concept front gauge positioning, positioning accuracy is high, the base paper will never lead; paper advance adjustable.

5. Automatic glue supplement system can automatically replenish the lost amount of glue in the process of bonding, and cooperate with the recycling of glue to avoid the wastage of glue.

6. Measuring roller speed scientific design, to ensure uniform amount of glue at the same time, to avoid high-speed operation when the glue;

7.Use cot cleaning, make the lower roller clean and thorough, corrugated paper back no viscose, save frequent replacement scraper trouble;

8. Floating movable press bed to ensure that the laminated corrugated paper will not be flattened, but also ensure that the cardboard flat and straight;

9. Use independent water tank to control the water circulation, clean clean, not easy to accumulate glue;

10. Roller pressure unilateral adjustment, change the bottom paper specifications, only unilateral shake to the required scale, no need to test the pressure of each roller, adjust the machine convenient and rapid.

5. Main appliance configuration

1.Xinjie PLC, PLC signal scanner, signal converter, Taiwan CPG motor. Double frequency conversion, liquid level automatic, liquid level alarm, counting, counting alarm, failure automatic downtime device adopt Invt brand.

2.Main engine: sprocket, synchronous wheel high frequency quenching, synchronous belt, synchronous wheel are all products of Xiamen joint venture; positioning belt is Italian technology; pressure transmission: the main control of frequency conversion is Invt brand, conveyor belt is Italian technology.

3.The total length of the new Laminator machine is 8.8 meters, in which the main engine is 3.5 meters long, the pressure transmission is 5 meters long, the paper table is 0.8 meter long, the pressure transmission shaft is 18, the positioning belt is 6, the synchronous wheel is 3, and the synchronous belt is 1. The conveying table is stainless steel turning bridge support. . The conveyer is stainless steel over bridge bracket.

4.The wheelbase adjusting bar adopts pressure bearing worm gear regulation. Drive shafts are dual-disc dual-bearing and balance treatment.

Technical parameter