High Speeding Flexo Printing Machine EPC Control Ceramic Anilox Roller

Quick Detail:

Machine frame: 75-100mm

Model No. : YTB-6

Max speed: 100m/min

Plate Material: resin plate or rubber

Color& page: Multi-color printing press

Anilox roller:steel or ceramic anilox

Tension: Auto tension controller

Certificate: CE Certificate

Description:

1. The main features:
1. Take it easy, accurate color, long life.
2. Use motors, variable frequency speed control, saving electricity, small running fluctuations.
3. Off printing roll automatic stop the ink-running motor, and up-printing roll automatic start running the ink.
4. Use special diagonal-tooth gear, accurate printing size.
5. Two sets of heating devices, including central heating and constant temperature control system for group control.
6. Low-roller special steel processing, and special process, and plating thickness of 0.1mm protective layer of hard chromium.
7 Alloy roll with hard oxidation, treating by dynamic balance, static balanced.
8 With cold wind bellows, and can effectively prevent produce with ink adhesion after printing
9. Print produce are clear and good arrangement quality.
10. Bearing: NSK, Japan Brand, aluminum alloy roll


2. Machine process:
Unwinding unit-----auto tension controller for unwind ------EPC for correct position ---------Flexo printing -----------Heating and drying -------Rewinding Unit


3. Machine different requires:
1) machine width require:
Standard: 600, 800, 1000, 1200, 1400, 1600mm
Special: 1800, 2000, 2200, 2400m, 3200mm etc.

2) machine speed require:
Standard / normal speed: 10-70m/min
Middle speed: 10-100m/min
High speed: 10-120m/min

3) machine printing material require:
Standard: For plastic film, PE, PP, OPP, HDPE, LDPE, etc. And 30-150gsm paper
Standard 2: Only for paper, 20-400gsm
Standard 3: Only for non woven material
Special: For alumnium foil, pp woven bag etc.

Specifications:

Our printing effect: