Non Wove Fabric Flexo Printing Machine Auto EPC With Doctor Blade

Quick Detail:

Machine frame: 75-100mm

Model No. : YTB-4

Max speed: 5-120m/min

Plate Material: resin plate or rubber

Color& page: Multi-color printing press

Anilox roller:steel or ceramic anilox

Tension: Auto tension controller

Certificate: CE Certificate

Description:

Flexo printing machine is suitable for printing such packing materials as polyethylene, polypropylene plastic bag, glass paper and roll paper, etc.

And flexo printing machine is a kind of economic printing equipment for producing paper packing bag for food, supermarket handbag, vest bag and clothes bag, etc.
Flexo Printing Machine Suitable Material:

Paper:

Kraft paper: 40 ~ 350g/m2, single-sided coated paper: 30 ~ 350g/m2, copy paper: 15 ~ 350g/m2, firecrackers and paper: 40 ~ 350g/m2,silicone paper : 50 ~ 350g/m2, coated paper: 30 ~ 350g/m2, dust-free paper: 25 ~ 350g/m2,release paper: 40 ~ 350g/m2 composite paper, 30 ~ 350g/ m2

Woven:

woven :15-120 grams,non woven :15-500 grams

Film:

PVC: 10 ~ 120μm, OPP: 10 ~ 100μm, BOPP: 10 ~ 100μm, PE: 15 ~ 150μm, NY: 10 ~ 120μm, PET: 10 ~ 100μm, CPP: 10 ~ 100μm

Economic Type Flexo Printing Machine Printing Speed:5-60m/min

Middle Speed Flexo Printing Machine Printing Speed:5-80m/min
High Speed Flexo Printing Machine Speed:5-120m/min

Procedure

A.Unwind:

1)Wind Roller: Air Shaft or Mechanical Roller
2)Unwind Control: Friction Type or Tension Control With Magnetic Powder
3)You can choose EPC(Edge Correction System)

B.Printing Unit:

1)Anilox Roller:Metal Anilox Roller or Ceramic Anilox Roller
2)Doctor Blade:General Doctor Blade(Single Blade) or Enclosed Doctor Blade
3)Ink: Water Ink, Water Base Ink, oil base Ink,

C.Dryer:

Electrical Heating

D.Rewind:

1)Wind Roller: Air Shaft or Mechanical Roller
2)Rewind Control: Friction Type or Tension Control With Magnetic Powder

Advantage:

1. Easy operation, flexible starting, accurate color register.
2. The meter counter can set printing quantity according to the requirements. Stop the machine automatically at the quantity or when the material is cut off.
3. Pneumatic printing cylinder lift and lower, it will stir the printing ink automatically after lifting.
4. The printing ink is spread by the anilox cylinder with even ink color.
5. Reliable drying system coordinated with high-speed rotation, it will automatically break circuit when the machine stops.
6. 360°continuous and adjustable longitudinal register device.
7. The frequency control of motor speed adapts to different printing speeds.
8. There are Jogging/Stopping buttons on the plate roller base and material rolling rack so as to make it easy operate the machine when the plate is installed.
9. Magnetic powder brake for unwinding tension control,magnetic powder clutch for rewinding tension control.

Specifications:

Our printing effect: