High Quality Zg Peripheral Transmission Mud Scraper for Mineral Processing Plant
Introduction
The raw water of the central drive mud scraper flows through the central water distribution tube and then radiates to the overflow trough around the pool. As the flow rate decreases, the suspended matter in the water body is separated and settled at the bottom of the pool , and the supernatant flows out through the overflow weir. The sink drains out of the pool.
Advantages
1. Simple structure, low energy consumption, convenient management and maintenance
2. Smooth operation, safe and reliable work
3. Good effect of scraping sludge and low moisture content of discharged sludge
Features
ZG peripheral transmission mud scraper is mainly composed of central slewing bearing, rotation frame, scraper and scum board, current collecting device, driving mechanism, track and traveling wheel, etc.
Its working mechanism is as follows: raw water flows out from the tank bottom via the central buttress; after water distribution by draft tube, the effluent is discharged to the catch basins around the tank in radiating pattern; with the reduction of flow rate, the suspended matters in the raw water are separated and deposited to the tank bottom. The rotation frame takes the central bearing as the circle center; under the function of driving mechanism, the travelling wheel at the end rotates along the peripheral tracks, driving the scraper board which rotates slowly under it along a near log spiral moving trajectory; the scraper board scrapes the mud to the mud catch basin at the center of setting tank,then the mud is discharged out of the tank by hydraulic pressure or pump while the scum on the top is scraped to the scum hopper by scum board and then discharged.
ZG peripheral transmission mud scraper is suitable for mud scraping and drossing in radiant (circular) deep setting tank with relatively large diameter (Φ>15m) in water plants or sewage treatment plants within plumbing work.
Its features: simple structure, energy-saving, convenient maintenance and management; smooth operation, sage and reliable work; low water content in scraped mud.
Parameter
Models and specifications | ZG-16 | ZG-18 | ZG-20 | ZG-22 | ZG-24 | ZG-25 | ZG-28 | ZG-30 | ZG-35 | ZG-37 | ZG-40 | |
Applicable tank diameter (m) | 16 | 18 | 20 | 22 | 24 | 25 | 28 | 30 | 35 | 37 | 40 | |
Motor power (kw) | 1.1 | 1.5 | 2.2 | 3.0 | ||||||||
Speed of scraper board at the margin | Primary setting tank | 2-3 | ||||||||||
Secondary setting tank | 1.5-2.5 | |||||||||||
Embedded and civil engineering conditions (m)
|
D1 | 2800 | 2800 | 3000 | 3000 | 3500 | 4000 | 4000 | 4200 | 4200 | 4500 | 4500 |
D2 | 1350 | 1400 | ||||||||||
H1 | 1800 | |||||||||||
a | 1200 | 1200 | 1400 | 1400 | 1400 | 1400 | 1800 | 1800 | 2000 | 2000 | 2000 | |
b | 800 | 800 | 900 | 900 | 900 | 900 | 1000 | 1000 | 800 | 1000 | 1200 | |
c | 280 | 280 | 300 | 300 | 300 | 300 | 320 | 320 | 280 | 320 | 350 | |
d | 200 | 250 | ||||||||||
H2 | 700 | 700 | 800 | 800 | 800 | 800 | 900 | 900 | 900 | 1000 | 1000 | |
e | 700 | 700 | 800 | 800 | 800 | 800 | 900 | 900 | 900 | 900 | 1000 | |
Load (t) | P | 4.0 | 4.5 | 5 | 5.5 | 6 | 6.5 | 7 | 8 | 9.5 | 11 | 11.5 |
W | 4.5 | 5 | 5.5 | 5 | 5.5 | 7 | 7.5 | 8.5 | 10 | 11.5 | 12 |