Flotation Cell XJ Flotation Machine for Mineral Processing

Introduction

Flotation machine is used for refining non-ferrous and ferrous metals. A flotation machine consists of two flotation cells, the first flotation cell is called a suction cell, and the second flotation cell is called a direct flow cell. And there is an intermediate chamber between the two flotation cells. The air is sucked in by the intake pipe, and the suction volume is relatively large. According to the different physical and chemical properties of the mineral surface, the flotation machine agitates it and collects useful minerals. Automatic aeration to obtain the required minerals.

Features
XJ flotation machine is a widely used model introduced from the form Soviet Union with a long history. Currently, it is still widely applied in the grading of mines.

The V-belt of the motor in the flotation machine drives the impeller to rotate, which can produce centrifugal effect, thereby forming negative pressure. On the one hand, it can inhale enough air to mix with the pulp, on the other hand, it can stir and mix the pulp, and at the same time refine the foam, so that the mineral and foam are combined. This method can be used for the separation of non-ferrous metals, ferrous metals, precious metals, non-metallic minerals and chemical raw materials. It can be used for rough selection, sweep selection and other processing processes.

Working Principle
1. when flotation machine works, slurry is inhaled from the bottom of the trough to the space between impellers
2. Meanwhile, the low pressure air send by fan is sent to this area through the air distributor in the hollow shaft
3. After sufficient mixing, the slurry is pushed out by the impeller, and then goes to the whole trough
4. When the froth rises to the stable level, after the enrichment processing, froth overflows to the froth through from the overflow weir. Another part of ore slurry flows to lower part of impeller for the remis with air
5. The remained slurry flows to the next trough until becomes residue

Parameter

​

Why choose our company machine?

Q1: Hi, are you a mining machinery manufacturer?
Answer: Yes, we are a professional manufacturer of mining machine. Our company welcomes customers to visit our factory at any time.

Q2: How long is the warranty period of your equipment? Does your company provide spare parts?
Answer: The warranty period of our machine is one year. For those wearing parts, we guarantee to provide high-quality parts for a long time.

Q3: How long does it take to deliver?
Answer: Production usually starts after receiving the advance payment. Small machine is guaranteed to be delivered within one month. Large-scale machine is guaranteed to be delivered within 2-3 months.

Q4: Do you provide machine operation guidance?
Answer: Yes. We have professional engineers for installation, commissioning and operation guidance.