2mm White EPE Foam For Wood Flooring With Silver Foil For Sound Reduction
Introduction:
sliver EPE underlayment providing good sound reduction, this affordable flooring underlayment has a built in lip and tape feature for easy installation. PE foam with silver film provides a vapor barrier for moisture protection and preventing mold and mildew buildup. This Unique underlayment is suitable for underfloor heating.
Benefits
- Cost effective
- Eco-friendly
- Sound insulation
- Moisture proof
- Heat preservation
- Non-allergenic,odorless,and non-toxic
- Tape and overlap ensure quick installation
Roll Cover: | 18.6m2 |
Roll Width: | 1100mm |
Roll Overlap | 100mm |
Thickness | 2mm |
Moisture Resistance Foil | Silver Foil |
Material: | Polyethylene |
Antimicrobial: | No |
Moisture Resistant | Yes |
Cushioning: | Yes |
Commercial / Residential: | Residential |
How to Install
Step 1: Clean Your Subfloor
Clean your subfloor using your broom and dustpan so that it is free of any foreign objects.
Step 2: Roll Out Your Underlayment
Roll your underlayment next to the wall. Start in the corner to keep it as even as possible across the room.
Step 3: Cut the Section
Once you have your underlayment firmly in place, cut the section using your scissors or utility knife.
Step 4: Roll Out the Next Section
Roll out the next section with the tape side over the overlapping film on the previous section.
Step 5: Butt Underlayment
Butt your underlayment sections together so that the tape side is flush up against the other piece of underlayment and on top of the overlapping film.
Step 6: Cut Section
Cut the next section of underlayment.