2mm High Density Rubber Underlay With Silver Film For Laminate Flooring
Introduction:
Description | rubber with silver film | |||||
Color | green | |||||
Density | 1.6kg/sqm | |||||
Roll size | 15 sqm | |||||
Thickness | 2mm | |||||
Coaing | silver film |
How to Install
Step 1: Clean Your Subfloor
Clean your subfloor using your broom and dustpan so that it is free of any foreign objects.
Step 2: Roll Out Your Underlayment
Roll your underlayment next to the wall. Start in the corner to keep it as even as possible across the room.
Step 3: Cut the Section
Once you have your underlayment firmly in place, cut the section using your scissors or utility knife.
Step 4: Roll Out the Next Section
Roll out the next section with the tape side over the overlapping film on the previous section.
Step 5: Butt Underlayment
Butt your underlayment sections together so that the tape side is flush up against the other piece of underlayment and on top of the overlapping film.
Step 6: Cut Section
Cut the next section of underlayment.