KLD805 80GHz 76mm Lens Antenna Radar Liquid Level Transmitter For High Temperature And Pressure
Introduction

The KLD805 80GHz 76mm Lens Antenna Radar Liquid Level Transmitter is a remarkable device. Specifically engineered for high temperature and pressure environments, it utilizes an 80GHz frequency and a 76mm lens antenna. This transmitter accurately measures liquid levels, providing reliable data even under extreme conditions, ensuring efficient industrial process control.
Feature

● High signal-to-noise ratio, small measurement blind zone
● High resolution, 1MM
● Higher precision, ±2MM
● Narrower emission angle, 3° antenna beam angle
● Shorter wavelength, better reflective properties on the surface of the measuring medium

Product Dimension
Unit in mm:


Installation Method
Flange installation
When using flange installation, the minimum distance between the instrument and the tank
wall should be 200mm.
① datum plane
② vessel center or axis of symmetry


Hoisting Installation

Radar level transmitter is a commonly used material measuring instrument, it can accurately measure the height of materials, and transmit the data to the control system for analysis and processing. Although the radar level transmitter has a strong tolerance, it needs special attention when used in a high temperature environment.

The high temperature environment will have a great impact on the measurement accuracy of the radar level transmitter, mainly because the high temperature will cause the material to expand, thereby affecting the measurement results of the material. Under high temperature conditions, the expansion of the material will cause deviations in the measurement of the height of the material, thereby affecting the actual consumption of the material. In addition, the high temperature environment will also have an impact on the material properties of the radar level gauge, such as reducing the life and stability of electronic components and mechanical parts.

Therefore, when the radar level transmitter needs to be used in a high temperature environment, special materials and processing methods need to be selected to ensure its stable performance. The measuring rod and antenna of the level transmitter are usually made of high temperature resistant materials such as steel and ceramics. In addition, the circuit of the level transmitter also needs to undergo special protection treatment to prevent adverse effects of high temperature on electronic components. For example, install protective covers for capacitor plates and inductors to prevent conductor corrosion caused by high temperatures.

​