KUS640 Series Intelligent Ultrasonic Level Sensor 4-20mA remote transmission IP68
Product Features
◆Power supply: 24VDC, customized support 12-24VDC
◆Special wide temperature LCD display (-30℃~80℃);
◆Vertical installation or axial installation, providing a variety of liquid level/level interfaces and interface materials;
◆ LCD with parameterization and three setting buttons.
Application
KUS640 series is used to indicate and monitor the changes of water pressure/water level value at the installation site, and upload the real-time data to the centralized management platform through the built-in wireless transmission module, which is convenient for users to manage intelligently and centralizedly. It is mainly used in the following industries:
• Fire water system
• City water supply
• Sewage treatment
• Long-distance heating
• Food industry
• Chemical, energy
Technical parameter
Measured variable | liquid level, material level |
Measuring range | 150mm-1000mm(Can be customized according to demand) 200mm-3000mm/300mm-6000mm/300mm-12000/600mm20000mm/1.2m-30m/1.8-50m |
Comprehensive accuracy | RS485/4-20mA,±1%FS/ 0.15℃ |
Temperature compensation | -10℃~70℃ |
Vibration effects | < ± 0.05%/g,500Hz in all directions (according to IEC 68-2- 64) |
ambient temperature | -25~+85℃ |
Storage temperature | -40~+85℃ |
Protection class | IP68 ,Complies with EN 60529 |
Electromagnetic Compatibility | EN 61326/A2 Appendix A (2001 ) |
show | SFTN liquid crystal, green backlight, 5-digit display. |
limit value | Free settings |
Parameter settings | Use 3 buttons |
Unit | mm,The default unit is m. |
Weight | About 1.35kg |
Joint | 1NPT,Stainless steel, length 20mm (material and joint specifications can be customized according to customer requirements). |
Electrical connections | Make waterproof connectors, air vent cable entries according to EN 175301-803A |
Measurement period | ≤default 200ms, user set |
Selection Tips: For special requirements, please contact our company and indicate it in the order.
Precautions:
1. If you need to calibrate the instrument, please contact our company. Nonprofessionals are not allowed to calibrate the instrument. 2. When calibrating the watch, please turn on the watch first, and then calibrate after 1 hour of constant temperature.
Storage and Transportation
1. The product should be stored at -40℃~+80℃, relative humidity not more than 90%, ventilated, dry and non-corrosive gas warehouse.
2. The product, the certificate of conformity and the instruction manual are packed in one package, and strong collision is strictly prohibited during transportation. Note: The contents of the manual are subject to change without prior notice, please pay attention to keep in touch.
