This sensor provides very short to long-range detection and ranging, in a compact, robust PVC / PTFE housing, designed to meet IP67 water intrusion. The power 13V-30V operation detects objects from 0.2 meters to 2 meters. The interface output formats RS485 serial digital output.
This sensor provides highly reliable, short to long-range detection and ranging capabilities, all housed within a compact and robust PVC/PTFE casing designed to meet stringent IP67 standards for water intrusion. The IP67 rating ensures the sensor is dust-tight and protected against temporary submersion in water, making it ideal for use in harsh and wet environments.
The sensor operates within a wide power range of 13V to 30V, allowing for flexibility in various application setups and ensuring stable performance under different power supply conditions. Its detection range spans from as close as 0.2 meters to as far as 2 meters, making it suitable for a broad spectrum of applications that require precise proximity measurement and object detection.
To facilitate seamless integration with modern systems, the sensor features an RS485 serial digital output interface. This industry-standard communication protocol enables robust, long-distance data transmission, minimizes signal interference, and supports multiple devices on the same network, making it highly efficient for industrial and commercial applications.
Whether used in automated manufacturing processes, robotics, vehicle proximity detection, or environmental monitoring systems, this sensor's combination of durability, wide operational range, and reliable communication makes it an indispensable component in ensuring accurate and efficient operation.
Features
. Designed for outdoor or indoor environments
. High sensitivity
. Readings can occur up to every 50mS (20Hz) within 2meters
. Free run operation can continually measure and output ranger information
. 13-30 supply with very low average current draw
. 0-10V with RS485 interface.
. Sensor operates at 125KHz.
. Sensor beam angle is 7 degrees.
.The analogue output can be set between 0-10V can work with the switch output.
Parameters
General Parameters | Mechanical Properties | ||
Detection Range | 200mm~2000mm | Connection | 5 pin cable |
Transducer Frequency | 125KHZ | Weight | 100g |
Repeatability Precision | ≤1% | IP grade | IP67 |
Response Time | <50ms | ||
Beam Angle | 7°±2 | ||
Temp. Compensation | inside/outside/fix temp. | ||
Electrical Parameters | |||
Operating Voltage | 14.5VDC~27VDC | ||
Limit Working Voltage | 13VDC~30VDC | ||
Power Consumption | ≤30mA | ||
Circuit Protection | short-circuit protection, overload protection | ||
Output | Digital Output | RS485 | |
Analogue Output | 0~10V | ||
Switch Output | 0V / 10V | ||
Ambient Environment | |||
Operating Ambient Temp. | 0~70℃ (-40~85℃, -55~125℃, etc, customizable) | ||
Storage Temperature | -55~1 |