The 5V ultrasonic level meter is an essential device for septic tank level measurement. Operating at 5V, it emits ultrasonic waves to determine the liquid level within the septic tank. It provides accurate and real-time data, allowing for efficient management and timely maintenance. With its compact design and reliable performance, it is a practical solution for septic tank monitoring.
Unit in the diagram is mm.
Cable color | Pin | Description | Note |
Red | 1 | Power supply | |
Black | 2 | GND | |
Yellow | 3 | Analogue output | The 600B will work in mode 1 or 0 cannot work in power save mode, if the 4-20mA, 0-3.3V 0-5V analogue output used. |
Blue | 4 | RS485A+ | TTL-TXD for ttl output signal |
Green | 5 | RS485B- | TTL-RXD for ttl output signal |
Cable color | Pin | Description | Note |
Red | 1 | Power supply | |
Black | 2 | GND | |
Yellow | 3 | Switch output | Load current 1A@60V |
White | 4 | Switch output | |
Brown | 5 | RS485A+ | TTL-TXD for ttl output signal |
Green | 6 | RS485B- | TTL-RXD for ttl output signal |
KUS600 | |
Sensing range | 600... 5000 mm@3.3V power supply. The measure distance can reach 6 meters if the power supply is 24V. |
Adjustment range | 300….5000mm |
Unusable area | 0 ... 600 mm |
Response delay | approx. 10 ms |
Material | PVDF |
Operating voltage UB | 3.3 ... 24 V DC , ripple 10 %SS |
No-load supply current I0 | ≤ 20 mA active period and ≤0.3mA during sleep time |
4. Installation conditions
If the sensor is installed at the environment temperature fall below 0℃,It should do well on the protective measures. In case of direct mounting of the sensor in a through hole using the steel nuts, it has to be fixed at the middle of the housing thread.
Packing and shipping