KUS640 Series
KUS640 series intelligent ultrasonic level gauge/level sensor is a level gauge product with on-site display and 4-20mA remote transmission 485 remote transmission launched by our company.
Product Features
◆Power supply: 24VDC, customized support 12-24VDC
◆Special wide temperature LCD display (-30℃~80℃);
◆Vertical installation or axial installation, providing a variety of liquid level/level interfaces and interface materials;
◆ LCD with parameterization and three setting buttons.
Introduction
This sensor provides very short to long-range detection and ranging, in a compact, robust PVC housing,
designed to meet IP65.
Product Features
◆Power supply: 24VDC, customized support 12-24VDC
◆Special wide temperature LCD display (-30℃~80℃);
◆Vertical installation or axial installation, providing a variety of liquid level/level interfaces and interface materials;
◆ LCD with parameterization and three setting buttons.
Parameters
Enter | |
Measured variable | liquid level, material level |
Measuring range | 150mm-1000mm(Can be customized according to demand) 200mm-3000mm/300mm-6000mm/300mm-12000/600mm-20000mm/1.2m-30m/1.8-50m |
Output | |
Comprehensive accuracy | RS485/4-20mA,±1%FS/ 0.15℃ |
Temperature compensation | -10℃~70℃ |
Vibration effects | < ± 0.05%/g,500Hz in all directions (according to IEC 68-2-64) |
Rated conditions Environmental conditions | |
ambient temperature | -25~+85℃ |
Storage temperature | -40~+85℃ |
Protection class | IP65 ,Complies with EN 60529 |
Electromagnetic Compatibility | EN 61326/A2 Appendix A (2001 ) |
Display and control | |
show | SFTN liquid crystal, green backlight, 5-digit display. |
limit value | Free settings |
Parameter settings | Use 3 buttons |
Unit | mm,The default unit is m. |
Weight | About 1.35kg |
Materials of non-wetted parts | |
Joint | 1NPT,Stainless steel, length 20mm (material and joint specifications can be customized according to customer requirements). |
Electrical connections | Make waterproof connectors, air vent cable entries according to EN 175301-803A |
Measurement period | ≤default 200ms, user set |
Selection reminder: For special requirements, please contact our company and indicate in the order.
Precautions:
1. If you need to calibrate the meter, please contact our company. Non-professionals are not allowed to calibrate the meter.
2. When calibrating the meter, please turn on the meter first, and calibrate it after 1 hour of constant temperature.