KFQ100 Float Level Switch with an Operating Pressure of 1.0 - 3.0 MPa
The KFQ100 float level switch is a remarkable device designed for liquid level detection. It operates within a pressure range of 1.0 - 3.0 MPa, making it suitable for various industrial applications. Its robust construction ensures reliable performance under pressure. This switch utilizes the float's movement to trigger a signal when the liquid level changes. It is easy to install and maintain, and can be widely used in chemical plants, oil refineries, and water treatment facilities. It helps control liquid levels accurately, enhancing operational safety and efficiency.
Contact Capacity: 10W, 30W, 50W
Switch Current: 0.5A
Switch Voltage: 220VAC/24VDC
Insulation Resistance: > 100MΩ
Working Life: 1 million times
Working Pressure: 1.0~3.0 MPa
Working Temperature: SUS: -20~200℃ PP: -10~80℃
Medium Specific Gravity: >0.55
Product Material: SUS304/SUS316/PP/PE/PTFE
Connecting Rod Float | Sample Diagram of Connecting Rod Float |
![]() | ![]() |
The installation position should be kept away from the water inlet, otherwise the switch may malfunction due to the water inlet.
If the switch is installed on the concrete pool wall, an L-shaped angle steel bracket can be added.
If the switch is installed in the stirring area, a wave-proof tube or wave-proof baffle can be installed.
Select a flange connection pipe with an inner diameter larger than the diameter of the floating ball.
The specific gravity of the liquid being measured must be greater than that of the floating ball.
Plastic materials are suitable for acidic and alkaline liquids, while metal materials are suitable for high-temperature liquids such as fuel oil.
The action point of the floating ball has been adjusted at the factory according to the customer's ordering requirements. Please do not adjust the position of the floating ball at will.
The connected load capacity must not exceed the output point capacity.