KTF Series Turbine Flow Meter
Introduction
KTF series turbine flow meter is suitable for the measurement of clean or basically clean individual liquids, alone or with related equipment, and can be used to measure volume flow or total volume in closed pipelines. It has the characteristics of simple structure, light weight, high precision, good reproducibility, sensitive response, easy installation and maintenance, etc. It is widely used in industries such as petroleum, chemical industry, water supply, food, pharmaceutical and scientific research and experiment. It is an ideal flow measurement and energy saving meter.
KTF series turbine flow meter converts the flow of liquid in the pipeline into electrical pulse signals, and completes the measurement or total amount of liquid flow in the pipeline through display instruments or computer system processing. measure.
Technical Specifications
Pipe Size (DN)mm | Flow Range(m3/h) | Nominal pressure (Mpa) | ||
0.2% | 0.5% | 1.0% | ||
4 | 0.04-0.25 | 6.3 | ||
6 | 0.1-0.6 | 6.3 | ||
10 | 0.2-1.2 | 6.3 | ||
15 | 1.2~4 | 0.6~6 | 0.4~6 | 2.5 6.3 16 |
20 | 2~6 | 0.8~8 | 0.6~8 | |
25 | 3~10 | 1.2~12 | 1.2~12 | |
32 | 4~12 | 1.5~15 | 1~20 | |
40 | 8~25 | 3~30 | 3~30 | |
50 | 12~40 | 5~50 | 5~50 | 6.3 2.5 |
65 | 15~60 | 7~70 | 5~70 | |
80 | 20~100 | 16~100 | 12~120 | |
100 | 50~160 | 25~160 | 20~200 | |
125 | 50~200 | 30~250 | 25~280 | |
150 | 100~300 | 50~300 | 40~400 | |
200 | 200~600 | 100~600 | 80~800 | |
250 | 300~1000 | 160~1000 | 120~1200 | 2.5 |
300 | 250~1600 | |||
400 | 400~2500 | |||
500 | 600~4000 |
Ambient Temperature | -20~+55℃ |
Relative Temperature | 5%~95% |
Atmospheric Pressure | 86~106Kpa |
Ordinary Type Medium Temperature | -20~+120℃ |
Explosion-Proof Type Medium Temperature | -20~70℃ |
Explosion Proof | dⅡBT5 |
Power Supply | Two wire: +24VDC Three wire:+12VDC~+24VDC |
Connection | Thread or Flange |
Dimensions
Thread Connection
Flange Connection
Pipe Size DN (mm) | Sensor Dimension (mm) | Flange Dimension (mm) | thread size | ||||||
L | H | D | D1 | D2 | D3 | n-do | L1(mm) | G | |
4 | 225 | 145 | 1/2 | ||||||
6 | 225 | 145 | 1/2 | ||||||
10 | 345 | 170 | 1/2 | ||||||
15 | 75 | 190 | 95 | 65 | 45 | 4-14 | 23 | 1 | |
20 | 85 | 210 | 105 | 75 | 55 | 4-14 | 23 | 1 | |
25 | 100 | 230 | 115 | 85 | 65 | 4-14 | 30 | 11/4 | |
32 | 120 | 250 | 140/135 | 100 | 78 | 4-18 | 30 | 11/4 | |
40 | 140 | 260 | 150/145 | 110 | 85 | 4-18 | 35 | 2 | |
50 | 150 | 270 | 165/160 | 125 | 100 | 4-18 | |||
65 | 150 | 290 | 185/180 | 145 | 125 | 4-18 | |||
80 | 200 | 300 | 200/195 | 160 | 135 | 8-18 | |||
100 | 220 | 330 | 220/215 | 180 | 155 | 8-18 | |||
125 | 250 | 380 | 250/245 | 210 | 185 | 8-18 | |||
150 | 300 | 390 | 285/280 | 240 | 210 | 8-23 | |||
200 | 360 | 455 | 340/335 | 295 | 265 | 12-23 | |||
250 | 400 | 510 | 405 | 355 | 320 | 12-26/25 | |||
300 | 420 | 565 | 460 | 410 | 375 | 12-26/25 | |||
400 | 560 | 680 | 580 | 525 | 485 | 16-30 | |||
500 | 600 | 790 | 715/705 | 650 | 608 | 20-34 |