WPT-165A Automatic Paper Stacker Turning and Finishing Machine

WPT-165A Automatic Paper Stacker Turning and Finishing Machine

1. Introduction :

Automatic Paper Stacker Turning and Finishing Machine is used to loosen, remove dust, reduce ink odor, neatly align the edges of the paper at 90 degrees, replace the special pallet, and automatically turn the stack during double-sided printing before or after the print process. This equipment adopts automatic one-button start operation, thereby reducing labor intensity and saving labor, improving production efficiency, and printing quality, and reducing the probability of double-sheet downtime in printing and subsequent processing equipment.

2. Function and configuration

• Equipped with 4 automatic operation program modes
• Equipped with 4-channel independent blowing system(2-channel for WPT-125E)
• Equipped with side gauge automatic moving system
• Equipped with touch screen testing and parameter debugging system
• Equipped with pallet centering function
• Equipped with wireless remote-control system
• Equipped with operation warning system
• Equipped with a wind-free coupling system
• Equipped with vibration stepless frequency modulation system
• Equipped with stepless pressure regulation system for blowing
• Equipped with oil pressure free winding coupling system
• Equipped with digital clamping pressure control system
• Equipped with stepless speed regulation system for blowing speed
• Equipped with upper and lower pallet reduction system
• Equipped with automatic program memory system when power off
• Equipped with side gauge automatic paper detection system
• Adopt PCB integrated wiring system

3.Parameter

4. Detail

The PCB integrated wiring system improves the operation stability and simplifies the faults caused by complex wiring.

Adopt DI plug-in high-speed motion program controller, which can be quickly replaced and repaired

High-strength heavy-duty steel plate welded base to improve equipment stability and durability

Using high pressure hydraulic coupling rotator, the hydraulic oil pipe is in a static state when working (to prevent the torsion of the hydraulic pipe when it rotates and reduce the service life)

One-piece bending paper clamping table, no welding is required for paper clamping, which improves overall safety and has a beautiful appearance. The front end of the paper feeding is processed with a one-piece slope, which is convenient for the entry of paper piles.

It adopts touch screen control. The man-machine interface is equipped with rich flexible operation selection and maintenance and debugging functions, and various safety alarm prompts and misoperation prompts are built-in.