Control System PLC Automatic Transformer Coil Winding Machine With Copper Wire

Description

Control System PLC Automatic Transformer Coil Winding Machine With Copper Wire ZPX400 is a special equipment for winding transformer coil and other similar products. When winding, this coil winding machine can arrange wire layer by layer automatically. It can wind not only copper wire but also aluminium wire, round and flat wire can be handled.The coil shape depends on customer’s requirements, it can be circle, oval or rectangular. The counter of this winding machine can be count from 0 to 9999.99, even though the power is cut off suddenly, it can save the parameters input and the number of the turns also can be saved. The counter can reverse count the number of the turns. The machine can rotates forward or reverse, the rotating direction is switched through the foot pedal. This winding machine features slow starting, smooth running, high automation, and easy operation, etc.

Main Feature

• Small volume occupies small space
• Touch screen is used to input the necessary parameters with user friendly interface
• After inputting all of the necessary parameters, just need to press the foot pedal, the machine will wind according to the parameters input
• A potentiometer on the screen board is used to adjust the winding speed, the adjusting is stepless
• Minimum gap between turns can be set 0.01mm
• 1.5kw motor is used in the machine, which provide enough pulling force to wind coil
• Automatic laying the wire, a 0.75kw servo motor driven wire guide to arrange the wire precisely
• The wire decoiler can provide a proper tension to make the wound coil tight
• The tension can be adjusted through a valve
• The tension can be shown on a pressure gauge

Main Parameters

Typical standard specifications of ZPX400 are shown below, however these can be easily modified as requested.