Compact CNC Automatic Coil Winding Machine For Little Sized Oil Transformer

Description

Compact CNC Automatic Coil Winding Machine For Little Sized Oil Transformer ZPX400 is primarily used to wind transformer coil and other similar products, the wire material can be copper or aluminium, the wire type can be flat or round wire. This kind of winding machine is provided with a servo motor, which drives the wire guide, and guarantees the precise start-stop behavior. Oval, rectangular and circle coils can be wound with this machine. Touch screen is used to input all necessary parameters.

Main Feature

• Small volume, it is a compact machine, which occupies little space
• Touch screen with friendly interface, all the parameters are shown on the screen, it is easy to modify the parameters through the screen
• wind automatically according to the parameters input
• Adjustable winding speed, there is a potentiometer to adjust the winding speed
• Minimum spread pitch 0.01mm, this can be changed on the screen
• 1.5kw motor driving the square shaft, provides enough pulling force to wind coil
• Automatic laying the wire, driven by one 0.75kw servo motor
• Pneumatic tension to make the wound coil tight
• The tension is adjustable
• The tension can be shown on a pressure gauge

Main Parameters

Typical standard specifications of ZPX400 are shown below, however these can be easily modified as requested.

1. Center height from floor 900mm
2. Main winding motor 1.5kw
3. Rotating speed 0 - 160 rpm
4. Rotating diameter max. 350mm
5. Laying wire distance max 400mm
6. Finished coil weight max 200kg
7. Flat wire size max 3.0x6.0mm
8. Round wire diameter 0.3 -4.0mm
9. Spread pitch min. 0.01mm
10. Counting range 0 - 9999.99
11. Colour as required