Automatic 200mm Width Copper Foil Coil Winding Machine With Cold Pressure Welding
General Information
Automatic 200mm Width Copper Foil Coil Winding Machine With Cold Pressure Welding BRJ200 is a special foil winding machine for winding transformer or reactor foil coils and other similar products. This machine can wind copper or aluminium strip with max width 200mm, and it can handle one layer of foil and one layer of insulation paper. Cold pressure welding unit is adopted in the machine, which can wind cu foil and cu bar, cu foil and al bar, al foil and cu bar, and al foil and al bar together. This kind of foil winding machine is provided with PLC control system, which can make the machine run automatically as per the parameters input.
Main Components:
1. Main frame
2. Foil decoiler
3. Pressing roller
4. Winding unit
5. Insulation decoiler
6. Edge alignment system
7. Automatic cold welding unit
8. Pneumatic unit
9. Electrical control system
10. Foot pedal
Technical Parameters
Typical standard specifications of BRJ200 are shown below, however these can be modified as requested.
Max Foil Material Width: | 200mm |
Max. Axial Length ( incl. lead wire ): | 450mm |
Finished Coil OD. : | 600mm |
Coil Shape: | Round, Oval and Rectangle etc. |
Conductor Foil Material: | Copper or aluminum |
Cu Foil Thickness: | 0.2-2.0mm |
Al Foil Thickness: | 0.3-3.0mm |
Foil Material ID.: | ≤ 500mm |
Foil Material OD.: | ≤ 1000mm |
Foil Decoiler Number: | 1 pc |
Foil Decoiler Length: | 250mm |
Foil Decoiler Shaft: | Dia. adjustable range: 420-520mm |
Max Coil Weight: | 1000kg |
Rectifying Mode: | Photoelectric sensing |
Rectifying Deviation Precision: | ±0.5mm |
Cleaning Unit Control Mode: | pneumatic |
Insulation Decoiler Number: | 1 pc |
Insulation Paper Coil OD.: | ≤ 400mm |
Insulation Paper Coil ID.: | 76mm |
Insulation Decoiler Width | 250mm |
Insulation Paper Decoiler Shaft: | Expandable (pneumatic open/close action) |
Winding Speed: | 0~35 RPM |
Max. Working Torque: | 3,000n.m. |
Winding Power: | 4kw |
Welding Pressure: | 200 KN |
Cold Welding Device: | 1 set |
Positioning Bus Bar Device: | 1set |
Electric Grinding Device: | 1 set |
Cold Welding Mould: | 6 pcs |
Programming Type: | PLC |
Basic Function: | Input by segment, reversible counting, and power-off memory, etc. |
Operation Interface: | Touch screen |
Counting Turn Range: | 0 - 9999.9 |