Double Head Textile And Garment Industrial Conveyor Belt Broken Needle Metal Detector 220 v , 50 Hz

The Needle Detector is an ordinary needle detector designed with anti-jamming digital circuit and magnetic induction principle. It is mainly used to detect ferromagnetic metals such as needles and iron filings in textile products. Can effectively eliminate: electromagnetic waves such as ceiling fans, sewing machines, sealing machines.

Applicable places:

Check broken needles: women's wear, men's wear, student uniforms, overalls, baby products, knitwear, underwear, socks, fabrics, non-woven fabrics, embroidery, towels, bath towels, carpets, gloves, toys, handicrafts, etc. .

Through the inspection needle: hardware button, metal zipper, Japanese word buckle, bead chain, brooch and other clothing handbags metal accessories over the needle machine.

Features:

1. High sensitivity. diameter of 1.0mm are detected. The nine-point test method does not miss the inspection.

2. All steel frame is beautifully painted body, the whole machine is strong, and it is more beautiful, anti-impact and

anti-weak magnetic resonance than traditional aluminum sheet wings; suitable for docking assembly line operation.

3, super anti-interference computer chip integrated circuit, dual-channel sensor, equivalent to the traditional double-

probe needle detector;

4. All function keys are light touch type membrane switches, which avoids the shortcomings of mechanical buttons

being easily damaged;

5. There is a position display function, and the eight-point part shows the exact broken needle position function;

6, with a counting function, distinguish between good and bad products (qualified, total, detected);

7. The alarm function is three kinds of sound, light and stop machine. The sensitivity is adjusted from 1 to 10 levels;

8, special protection circuit, no object to pass through the automatic shutdown for 10 minutes;

9. All function settings are completed after the main power is turned on, without starting the motor;

10, with B / C (accessory / finished product) mode switching function, to adapt to the needle inspection of different

products;

11. When the broken needle or iron object is detected, the sound and light alarm modes are stopped, and the machine returns to the starting point and automatically runs aga

in.