Product introduction: Three-dimensional mesh filler is a kind of regular filler mainly used in sludge sewage treatment, a new type of space

The main body of the three-dimensional mesh packing is a dense and orderly spatial three-dimensional columnar structure formed by a number of curved and interlacing silk strips. The side of the packing is segmented, its cross section is mesh-like, and the holes in the middle of each grid constitute channels. The vertical corresponding intersections of each grid are provided with thick silk strips for reinforcement.

Product working principle: Three-dimensional mesh packing can make sewage, air and biofilm fully mixed infiltration contact exchange, biofilm can not only a large number of uniform on the wire, maintain good pore variability, but also in the operation process of the gas driven by the three-dimensional flow of sewage, collide with each other and are constantly cut into smaller bubbles by the spiral mesh, increase the utilization rate of oxygen, can reduce the aeration rate. At the same time, it can make the biofilm have a good effect and do not adhere to the clumping, so it has the characteristics of strong bubble cutting ability, large space volume utilization rate, no dead zone, etc. The installation form is the use of integral and put type, which is the current sewage treatment filler with better performance indicators.

Product features:

1, three-dimensional mesh packing material for PP, high temperature resistance, corrosion resistance.

2. Overall structure, large void ratio and large specific surface area.

3, microbial film hanging fast, easy to fall off, and no short circuit area.

4, the water flow is three-dimensional flow, no blockage, no clumping.

5, light, tough and firm, long-term use without deformation