Shaft to shaft reaction torque sensor shaft type torque transducer
Features
Dimensions
Specifications
Capacity | 0.5NM 1NM 2NM 3NM 5NM 10NM 20NM 30NM 50NM 100NM |
Rated output | 1.5 mV/V |
Excitation | 3-15V |
Zero balance | ±0.05mV/V |
Nonlinearity | ±0.2% R.O. |
Hysteresis | ±0.2% R.O. |
Nonrepeatability | ±0.05% R.O. |
Creep(10min) | ±0.1% R.O. |
Safe overload | 150% F.S. |
Ultimate overload | 200% F.S. |
Compensated temp. | -10...+40oC |
Operating temp. | -20...+60oC |
Temp. shift zero | ±0.02% R.O./oC |
Temp. shift span | ±0.02% R.O./oC |
Input resistance | 350(700) ohms |
Output resistance | 350(700) ohms |
Insulation resistance | >2000M ohms |
Ingress protection | IP60 |
Material of element | Aluminum alloy |
Cable | Ø5*3000mm 4-core shielded |
Wiring code | Red--Excitation+ Black--Excitation- |
Reaction torque sensor FTB
A torque sensor is a transducer that converts mechanical torque into mV signal proportional to the applied torque.The acting torsion causes deformation of the measuring element,the bonded strain gage deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply, the output signal between Sig+ and Sig- will change proportionally,thus the moment can be measured by measuring the output signal from the transducer.The output range of shaft torque transducer FTB is normally within -20mV...+20mV, signal amplification may be required for most applications, a signal conditioner can be used to get -5~5V, 0-10V or 4-20mA output for easy data processing.