FT-SAL-001 Solar 6V 60W LED Street Light Good Heat Dissipation Performance
Product advantages
Model | FT-SAL-001 |
Power | 60W,50cm*21cm*5cm |
Solar panels | 6V30W |
Number of chips | 60PCS |
Control mode | light control + time control |
Lithium iron phosphate battery | 115Wh |
Light flux | 180 lm/W |
Colour temperature | 6000K-6500K |
Chromogenic index | Ra≧75 |
Optically Controlled Voltage | 1.5V |
Full time required | 4-6h |
Working temperature | -5---60℃ |
arm | Long:120cm;caliber:5.8cm |
Warranty | 3 years |
Installation method
- Fix the hoop of the lamp pole arm on the wire pole and tighten it with screw (fix it on the wall, mark the four vacancies with colored pen or other marking tools, drill holes and tighten the four expansion screws).
- Install the U-frame on the solar panel and connect it to the lamp pole. The best way to install the solar panel is to tilt 45 degrees south.
- Connect the two red wires of the lamp head and clamp them with the wiring head, and tighten the nut corresponding to the solar connection line (the slot must be aligned).
- Cover the solar panels and test the lights. If everything is normal, the lights will turn on automatically at night.

