OPA340UA/2K5 Op Amps Single SOIC-8 Operational Amplifier Chip
Product Attribute | Attribute Value |
---|---|
Texas Instruments | |
Operational Amplifiers - Op Amps | |
SMD/SMT | |
SOIC-8 | |
1 Channel | |
5.5 V | |
5.5MHz | |
6 V/us | |
0.5 mV | |
2.5 V | |
- 40 C | |
+ 85 C | |
10 pA | |
750 uA | |
No Shutdown | |
80 dB to 92 dB | |
25 nV/sqrt Hz | |
OPA340 | |
Cut Tape | |
MouseReel | |
Reel | |
Amplifier Type: | Low Offset Voltage Amplifier |
Height: | 1.58 mm |
Input Type: | Rail-to-Rail |
Length: | 4.9 mm |
Output Type: | Rail-to-Rail |
Product: | Operational Amplifiers |
Supply Type: | Single |
Technology: | CMOS |
Width: | 3.91 mm |
Brand: | Texas Instruments |
In - Input Noise Current Density: | 0.003 pA/sqrt Hz |
Moisture Sensitive: | Yes |
Operating Supply Voltage: | 2.5 V to 5.5 V |
Product Type: | Op Amps - Operational Amplifiers |
PSRR - Power Supply Rejection Ratio: | 90.46 dB |
Factory Pack Quantity: | 2500 |
Subcategory: | Amplifier ICs |
Vcm - Common Mode Voltage: | Negative Rail - 0.3 V to Positive Rail + 0.3 V |
Voltage Gain dB: | 124 dB |
Unit Weight: | 0.002677 oz |
The OPA340 series operate on a single supply as low as 2.5 V with an input common-mode voltage range
that extends 500 mV below ground and 500 mV above the positive supply. Output voltage swing is to
within 1 mV of the supply rails with a 100-kΩ load. These devices offer excellent dynamic response
(BW = 5.5 MHz, SR = 6 V/µs), yet quiescent current is only 750 A. Dual and quad designs feature
completely independent circuitry for lowest crosstalk and freedom from interaction.
The single (OPA340) packages are the tiny 5-pin SOT-23 surface mount, 8-pin SOIC surface mount,
and 8-pin DIP. The dual (OPA2340) comes in the miniature 8-pin VSSOP surface mount, 8-pin SOIC
surface mount, and 8-pin PDIP packages. The quad (OPA4340) packages are the space-saving 16-pin
SSOP surface mount and 14-pin SOIC surface mount. All are specified from –40°C to 85°C and
operate from –55°C to 125°C. A SPICE macromodel is available for design analysis.