LMV301MGX/NOPB Operational Amplifier Chip 0.66V/us SC70-5 OPAMP
Product Attribute | Attribute Value |
---|---|
Texas Instruments | |
Operational Amplifiers - Op Amps | |
SMD/SMT | |
SC-70-5 | |
1 Channel | |
5 V | |
1 MHz | |
108 mA | |
0.66 V/us | |
8 mV | |
1.8 V | |
- 40 C | |
+ 85 C | |
35 pA | |
163 uA | |
No Shutdown | |
62 dB to 111 dB | |
40 nV/sqrt Hz | |
LMV301 | |
Cut Tape | |
MouseReel | |
Reel | |
Features: | Small Size |
Height: | 0.9 mm |
Input Type: | Rail-to-Rail |
Length: | 2 mm |
Output Type: | Rail-to-Rail |
Product: | Operational Amplifiers |
Supply Type: | Single |
Technology: | CMOS |
Width: | 1.25 mm |
Brand: | Texas Instruments |
Operating Supply Voltage: | 3 V |
Product Type: | Op Amps - Operational Amplifiers |
PSRR - Power Supply Rejection Ratio: | 67 dB |
Factory Pack Quantity: | 3000 |
Subcategory: | Amplifier ICs |
Voltage Gain dB: | 117 dB |
Unit Weight: | 0.000705 oz |
The LMV301 CMOS operational amplifier is ideal for singlesupply, low voltage operation with a guaranteed operatingvoltage range from 1.8V to 5V. The low input bias current ofless than 0.182pA typical, eliminates input voltage errors thatmay originate from small input signals. This makes theLMV301 ideal for electrometer applications requiring lowinput leakage such as sensitive photodetection transimped-ance amplifiers and sensor amplifiers. The LMV301 alsofeatures a rail-to-rail output voltage swing in addition to ainput common-mode range that includes ground. TheLMV301 will drive a 600Ω resistive load and up to 1000pFcapacitive load in unity gain follower applications. The lowsupply voltage also makes the LMV301 well suited forportable two-cell battery systems and single cell Li-Ionsystems.The LMV301 exhibits excellent speed-power ratio, achieving1MHz at unity gain with low supply current. The high DC gainof 100dB makes it ideal for other low frequency applications.The LMV301 is offered in a space saving SC-70 package,which is only 2.0X2.1X1.0mm. It is also similar to theLMV321 except the LMV301 has a CMOS input.