small solar charge controller
available: 0.5A 2A 4A 5A:
Solar Lamp Controller Intergrated LED Constant Current Driver
Main Fetures:
The running-parameters can be set via Infrared remote control
12V rechargeable battery support(only 12V,not support 24V)
Three Timing adjustment
Three-Stage LED Brightness Dimming:100%->50%->30%
(can be manual set)
output current can be adjusted
The DAY-NIGHT switch-point can be adjusted ,range: 0-3..9V
Overcharge and overdischarge protection for battery
Reverse connection protection for solar panel
Reverse connection protection for battery(but connect carefully)
Load short-circuit protection (but connect carefully)
ITEM | 12V |
Over-charge Protection | 15V |
Over-charge voltage | 14.4V |
Low voltage reconnect | 11.6V |
Over-discharge voltage | 10.8V |
| |
Max Solar Panel Power | <70wp |
Max Charging Current | <5A |
Max Solar Voltage | <25V |
|
|
Max Constant Current Output | 【SM-4AN-0A7】:700mA 【SM-4AN-1A4】:1400mA |
|
|
IR Frequency | 38Khz |
IR BaudRate | 2400Bps |
IR Distance | <1m (The distance is too near but not good) |
|
|
battery charging control | PWM |
Self Power consume | <5mA |
Waterproof | IP65 |
Fourth-Stage Dimming Explain
The Fourth-Stage Dimming is core feature of SM-0A5.
In most case,We want more energy-saving at mid-night or late-night,because there are no one. The Controller provide Fourth-Stage light mode,every stage brightness of LED and timer can be set by IR Parameters Setting Device [SM-IR08]. Default the First-Stage brightness is 100%, Second-Stage brightness is 50%, Third-Stage brightness is 30%.Fourth-Stage brightness is 50%.By using Foruth-Stage Dimming you can reduce power consumption up to 50%!
Other note :The Fourth-Stage is Early-Morning Light .
Brightness(mA)
100%
50%
30% Timer(Hour)
First Second Thrid Fourth