Doypack stand up pouch filling , sealing , packging machine for liquid , oil
Model | TC-MR8-200R |
No. of working stations | Eight |
Bags size | W:80~220mm L:100~300mm |
Filling Volume | 10– 2500g (Depending on type of products) |
Capacity | 35-40 bags/min (The speed depends on type of products and packaging material used) |
Total power consumption | 2.5KW |
Demension | 1460*2500*1400mm |
Compress air requirement | 0.6m³/min supply by user |
Pouch Type | All type of heat sealable preformed side seal bags, gusseted bags, block bottom bags,zip-lock recloseable bags, stand-up pouch with or without spout etc. |
Working Process
Station 1 Bag feeding
Feed many pouches or bags in the bag magazine, our main bag magazine can move up and down, you can feed bags very easily when it moved down, and when it moved up, there are a mechanical arm with two vacuum caps will take bag up and then transmit it to the mechanical gripper on the rotary table.
Station 2 Date Printing (option)
Station 3 Opening zipper
To open zipper pouches from top and bottom with two sets vacauum caps
Station 4 Open bag
To open stand pouches from top and bottom with two sets vacauum caps
Station 5 Filling
There are an opening detection device insert into the open bag or pouch to expanding it and detect if it is open or not.
No open no filling no sealing
Station 6 Close zipper or other option
Station7 Heat Sealing
To seal the pouch or bag mouth with a couple of heat sealing air bar, the sealing pattern you can option,net or straight lines
Station 8 Forming and output or sealing 2 to make the sealing stable and preventing from wrinkling with a couple of cold press, then outp