MachineU > China Products > Electrical Equipment & Supplies > Connectors & Terminals > Connectors
Non Radiative EDFA Optical Amplifier Plug In RJ45 Internet Port Responder
Non Radiative EDFA Optical Amplifier Plug In RJ45 Internet Port Responder
Non Radiative EDFA Optical Amplifier Plug In RJ45 Internet Port Responder
Non Radiative EDFA Optical Amplifier Plug In RJ45 Internet Port Responder
Specifications
Brand Name :
HUANSHUN
Model Number :
YGF1524T
Certification :
China Radio and Television access Card
Place of Origin :
CHINA
MOQ :
negotiation
Price :
Negotiable
Payment Terms :
T/T, Western Union, MoneyGram/Paypal
Supply Ability :
10000 sets per month.
Delivery Time :
Negotiable
Packaging Details :
safety packing
type :
EDFA Optical Amplifier
Model :
YGF1524T
Inter-Cut RF Level :
80±5(<60 Transmission Channel by 10lg60/n Append)dBuv
CSO :
≥65(Note 1)dB
MAX Storage Relative Temperature :
5～85%
Size :
483×385×44mm
Description

Non Radiative EDFA Optical Amplifier Plug In RJ45 Internet Port Responder

EDFA Optical Amplifier Summary:

The 1550nm erbium-doped fiber amplifier uses the erbium-doped fiber as the active medium. When the pump optical is input into the EDFA, most of the ground-state Er3+ can be pumped to the excited state. The excited state of Er3+ is quickly and non-radiative. The transfer to the metastable state, due to the average residence time of Er3+ on the metastable state is 10ms, it is easy to form a population inversion between the metastable state and the ground state. At the same time, the signal photons pass through the erbium-doped fiber. Under the effect of the stimulated radiation, a large number of photons are completely identical to themselves, so that the signal photons are rapidly increased, so that the optical signal that is continuously amplified can be obtained at the output end.

EDFA Optical Amplifier Features

◆ Built-in MCU microprocessor, the microprocessor software monitors the working state of the pump laser, and the working parameters are displayed by the panel (LCD). Once the operating parameters of the laser deviate from the allowable range of the set value, the microprocessor will automatically turn off the laser power, and the red light flashes to alert the alarm, and the panel display indicates the cause of the fault;

◆ Plug-in RJ45 Internet port responder, support SNMP network management protocol, Telnet, support the SFTH integrated network management system;

◆ It adopts 19′′ 1U standard rack, built-in high-performance main and standby switching power supply, can work in the city voltage of 90～255V, and supports hot plugging.

EDFA Optical Amplifier Technical Specifications

Item Unit Performance Index
Rated Output Optical Power dBm ≥Nominal Value,and support 0.5～-3 adjustable
Output Optical Power Stability dB ≤±0.1(when 0～+10dBm)
Input Optical Power Range dBm -8～+10(suggested +2～+7)
MAX Alarm Value dBm +10 Front Panel Optical Alarm
MIN Alarm Value dBm +2～-10Front Panel Optical Alarm, ≤-10 Shut Down
Working Wavelength nm 1535～1565
Optical Input&Output Return Loss dB ≥45
Noise Factor dB ≤5(Input Optical Power=0dBm)
Input-End Pump Leakage Power dBm ≤-30
Output-End Pump Leakage Power dBm ≤-30
Optical Input&Output Reflection Loss dB ＞53
Optical Adapter FC/APC, SC／APC
CNR(C/N) dB ≥50(Note 1)
CTB dB ≥65(Note 1)
CSO dB ≥65(Note 1)
Network Management Port RJ45(National Standards Network Management)
Inter-Cut RF Level dBuv 80±5(<60 Transmission Channel by 10lg60/n Append)
Working Voltage/Consumption V /W AC90～255V or DC48V/＜20(Single Power Supply),＜40(Double Power Supply)
Working/Storage Temperature ℃ -25～+55/-30～+70
MAX Storage Relative Temperature % 5～85
Size mm 483×385×44

Notes:

1.The Optical Link Indexes are measured by Measuring Optical Transmitter and Optical Receiver Combined Testing Results.

2.Above Main Performance Indexes conform to the Technical Requirements and Measurement Methods of GY/T 184-2002 CATV Analog Optical Fiber Amplifier.

Non Radiative EDFA Optical Amplifier Plug In RJ45 Internet Port Responder

Product tags

poe fiber media converter

,

poe media converter fiber

,

fc st fiber optic adapter
Send your message to this supplier
Send Now

Non Radiative EDFA Optical Amplifier Plug In RJ45 Internet Port Responder

Ask Latest Price
Product Detail
Brand Name :
HUANSHUN
Model Number :
YGF1524T
Certification :
China Radio and Television access Card
Place of Origin :
CHINA
MOQ :
negotiation
Price :
Negotiable
Contact Supplier
Non Radiative EDFA Optical Amplifier Plug In RJ45 Internet Port Responder
Non Radiative EDFA Optical Amplifier Plug In RJ45 Internet Port Responder

Zhejiang Huanshun Network Technology Co.,Ltd

Active Member
7 Years
zhejiang
Main Products :
FTTH Optical Receiver, 1550nm Optical Transmitter, EDFA Optical Amplifier
Certification Level :
Active Member
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products EDFA Optical Amplifier
MachineU China Products Electrical Equipment & Supplies Connectors & Terminals Connectors
Contact Supplier
Submit Requirement