5.6 Inch Wide Touch Screen Multi-function Optical Time Domain Reflectometer OTDR

Multi-function Optical Time Domain Reflectometer OTDR Description

Automatic test mode: OTDR will not need to select test distance and test pulse width. The system will automatically judge the length of the optical fiber cable and choose the proper test scope and test pulse width as well as the curve line will be an automatic or manual option to storage which is convenient for data analysis.

Multi wavelength test mode: When setting up the test parameter you can choose the double wavelength test mode, then the system will automatically switch the wavelength to carry out measurement to the effect of using different wavelength to make a measurement of loss in the same section of fiber cable in order to make a data analysis.

Multi curve line analysis function: It is available to make a comparison between any different curve line document and to make a displaying of analysis and calculation. Up to 4 curve lines can be displayed at same time.

High volume Polymer lithium battery: Super long standby time enables long time measurement application.

On line optical inspection: This function can effectively protect the OTDR itself and communication equipment.

Double maneuvering mode: Pure touch screen operation or pure physical key operation which can equally realize all functions which are convenient to the different operation habit of the engineers

Data analysis: The OTDR can storage and generate the standard curve line documents(.sor). More than 20000 storage volume can easily realize the print of analysis report and curve line print which are convenient to the check and acceptance of the project.

Features

• 5.6 Touch screen; 7.4V/4.4Ah large volume lithium battery
• Multi dynamic scope and wavelength combination for option
• Less than 0.8m dead zone and attenuation dead zone is 4 m
• Multi test mode, supporting touch screen and physical key operation as of two mode which can realize one key touching to accomplish measurement.
• Featuring flash alarm function against the optical fiber cable to the extent of utmost protecting the optical module of the OTDR
• Real-time test function which is convenient to make a real-time observation of the effect of fiber splicing
• Built-in large power red light source is benefit to the bare sight to observe the fault point in the near end of fiber cable
• Supporting English and Chinese input featuring friend input interface to utterly animation of keyboard of PC
• Built-in 8 G Rom which can storage over 80000 curve lines
• Matching PC data analysis and animation software can handle, generate and print out test reports in batch way
• 2 main US port available to make animation control by PC and external storage connection

Technical Specification

Typical Accident Test Wave Form

Delicate Man to Machine Interface

Accurate judgment of connector and terminal

Accurate measurement of distance and attenuation

HD 5.6’ Touch screen operation

Accuracy + convenient + speed

All test event+ parameter can be displayed in one screen

Comfortable key + water-proof

Both key and touch screen can operate at same time

OTDR VFL red light source connector

Configured with VFL red light source connector to utterly getting rid of red light pen for accomplishing all-in-one machine

Accessories