Easy Move Nail Salon Dust Collector , Beauty Fume Extractor Source Capture Exhaust System Remote Control

Waterun Fume Extractor is for cleaning of both particles and gases. It is designed to filter the harmful substances, such as hydrocarbon and cyanide, during the process of soldering, welding, laser marking & carving, 3D printing, moxibustion treatment, ect. It catches harmful smoke with freestanding ducts and adjustable air flow volume to significantly improve the working environment.

nail salon fume extractor,beauty fume extractor

Seven-Layer Filters

Pre-filter Cotton 1pc

Pre-filter 1pcs

PP filter 1pc

glass fiber filter 1pc

active carbon filters 3pcs

Features:

1. It realizes powerful suction with quiet operation
2. Brushless motor ensures low noise, stable performance, and long product life
3. Triple-filter design. Pre-filters and Main Filters can be replaced separately for prolonging the filter‘ s life time and cutting down the cost
4. It is easy to install and no need to lay pipelines
5. The airflow is freely adjustable according to working environments
6. Freestanding flexible ducts facilitate production changeovers
7. Ducts can be bent or lengthened as desired and maintain their shape after adjustment, letting you place them exactly where suction is needed.

FAQ:

1. What’s the functions for the filters?

Answers.

1) Pre-Filter/F8 pre-filter: the large-size pad filter can filter large particles of dust.

2) PP Middle Filter/Fiber glass filter: it filters the middle-size, small size particles.

3) Main Filter/Active carbon: it cleans harmful particles and fumes.

4) High efficiency filter(combine middle filter and active carbon filter): it can filter about 0.3micron particles and other harmful fumes.

2. What’s the life span of our fume extractor?

Answer: Our Brushless Motor can be continuous working 20,000 hours, consider environmental factors, usually it can use 4-5 years without any problems.

3.. The ducts for the fume extractor can be shortened or lengthened?

Answer: It can be shortened or lengthened appropriate; but we suggest not more than 1.5meter. For multi-station, the total pipe length should not more than 10 meters.

4. What’s the best distance between the nozzle and the smokes?

Answer: The distance to be 5-15cm is the best.

5. What’s the life span for the pre-filter, middle filter and the main filter?

Answer: 1. Pre-filter : normally it needs to replace by 1 months

2. Middle filter: normally it needs to replace by 3 months

3. Main filter: normally it needs to replace by 6 months.