Welding Smoke Extraction System , Compact Fume Extractio

Specifications:

welding fume extractor

Portable Welding Fume Extractor

1. Compact conformation

Welding Fume Extractor is compact and small size, which is convenient to operate.

2. Variable air volume

Welding Fume Extractor uses the PWM governor system, the airflow is variable. and it is practical, convenient and energy-saving.

3. High filtering efficiency

Adopting filter cartridge filter, the filter with high efficient PTFE layer has a high level of filtration efficiency (0.3-0.5micron) dust, and filtration degree above 99.9%.

4. Flexible suction

The suction is flexible and it can rotate in 360.

5. Convenient to clean

Welding Fume Extractor sets the cleaning hole, so it is more convenient to clean the dust and collection bin. In addition, the product can equip automatic reverse jet device.

Facility Characteristics

1. Welding Fume Extractor is equipped with high efficiency blower and motor, with overload prevention circle to avoid motor damage. It is of steady peformance.

2. Welding Fume Extractor is equipped with built in centralized controlling system. The operation panel is clear and simple, very easy to operate.

3. The filter core is with long using life. It can arrest the 0.3 μm particles.

The filtering effect is good for all kinds of particles including the wet particles.

4.Welding Fume Extractor is equipped with the all directions sucking arm of 360 degree rotating. It can suck the fume exactly fromthe source which make best use of fume collection efficiency and ensure the workers health in the largest extent.

5. Welding Fume Extractor is equipped with three layer filter system to avoid the damage effect of flame and large slag particles, which extend the useful life,safer and more reliable.

6. The clean air is exhausted uniformly and difusedly through the gridiron outlet, so it can minimized the noise.

7. Welding Fume Extractor is attached with all direction caster wheels, which makes the facility movable freely and easy to position.

8. Welding Fume Extractor parts working condition are all stable and has long useful life, meantime easy to replaced.

FQAs:

1. What’s the functions for the filters?
Answers. 1) Pre-Filter/F8 pre-filter: the large-size pad filter can filter large particles of dust (according the requirement to select pre-filter or F8)
2) PP Middle Filter/Fiber glass filter: it filters the middle-size, small size particles bigger powders for prolonging the main filter's life. (according the requirement to select PP middle filter or fiber glass filter,can use both, the efficiency better.)
3) Main Filter/Active carbon: it cleans harmful particles and fumes.
4) High efficiency filter(combine middle filter and active carbon filter): it can filter about 0.3micron particles and other harmful fumes.

2. What’s the advantage compare with ducted exhaust fan?
Answer: 1. Many advantages like (1) Clean the air quality (2) energy saving (3) easy installation, flexible remove (4) low cost (5) reduce the incidence of diseases and major diseases, and health is priceless (6) to reduce unpleasant smell (7) to reduce dust and other harmful substances, and so on.

3. What’s the life span of our fume extractor?
Answer: Motor lifetime is (continuous working 24 hours) 20,000 hours, consider environmental factors. Usually it can use 4-5 years without any problems.

4. The ducts for the fume extractor can be shortened or lengthened?
Answer: It can be shortened or lengthened appropriate; but we suggest not more than 1.5meter. For multi-station, the total pipe length should not exceed 10 meters.

5. What’s the best distance between the nozzle and the smokes?
Answer: The distance to be 5-15cm is the best.

6. How long need to to replace the pre-filter, middle filter and the main filter?
Answer: 1. Pre-filter : normally needs to replace by 1 months
2. Middle filter: normally needs to replace by 3 months
3. Main filter: normally needs to replace by 6 months.

7. Bent pipe will affect smoke purify?
Answer: Yes, it affect the suction power, it should reduce the bent rate.

8. Can our fume extractor completely filtered poison gas?
Answer: No, there still no any kind of filter can filter out 100% of poison gas, but you can make a different filter net rate upon request.