Features:

1. New economic version, lower cost

2. Smaller size, but with bigger filtering capacity

3. 360° dirt filtering design increase the dirt holding capacity by two times

4. DC frequency conversion motor, interlight and energy-saving, with a life-span as long as 40k hours

5. New diamond-shaped nozzle greatly increase the extraction area

Filters Combination

Main Filter

Middle Filter

Pre-Filter

Application:

Manual Soldering Fumes, Solder Pot Fumes, Soldering Robot Fumes, etc

Misuses of Purifier

Misuses 1: the greater the suction, the better

The greater the suction, the greater the power consumption, and the noise will be increased, so the suction should be appropriate to the use interface! Not the bigger the better!

Misuse 2: the higher the filtration rate, the better

High filteration rate itself is not bad, the problem is based on the using enviorment, if there is any need to achieve a very high filtration rate? For example, the operating room or laboratory has a very high demand for the cleanliness of air: but in the factory workshop, there is no need to use the high "filtration rate" like the hospital operating room.

The higher the "filtration rate", the more sophisticated the filtration system will be, and the greater the air resistance, so the higher the cost will be.

Misuse 3: the greater power, the better

The greater the power, the larger the noise will be, the more energy consumption, the higher the price will be. According to the using situation, choosing the appropriate power, using independent high efficiency, low power motor, although the power is small. the suction is not small.

Misuse 4: the more the air flow, the better

Industrial purifiers focus mainly on negative pressure (when negative pressure is high, the suction force is greater), not the air flow. Even though the air flow is large, it may not necessarily in great suction force.