gPV Type Fuse Link 10 X 38 mm 6A 1000 VDC 30KA PV Fuse

Description

Features

• 1000Vdc Fuse for Solar Panel Applications
• 10x38mm physical size with leads
• Designed to UL 2579
• Capable of interrupting low overcurrents associated with faulted
• Lead Free and Halogen free material

• DC Cold Resistance are measured at <10% of rated current in ambient temperature of 25℃
• Typical Pre‐arching I2t are measured at 10In Current
• Min Interrupting Rating: 1.35 x In
• Fuse Coordination w/: Thin film cells and 4”, 5” and 6” crystalline silicon cells.

Dimension & Structure

Recommended installation

Operating Temperature: -55℃ to +125℃ (Consider de-rating)

Stored condition: at temperature of +10℃~60℃, relative humidity ≤ 75%.

Recommended Soldering Parameters: Soldering pot temperature: 260℃ Max; Solder dwell time: 2∼5s

Resistance to Soldering Heat: 260℃, 10s. (Wave); 350℃, 5s. (Soldering iron)

Solderability: 260℃, ≤ 3s. (Wave); 350±10℃, ≤ 3s. (Soldering iron)

Lead Pull Strength: 5N for 10±1 Seconds

Lead Thrust Strength :2N for 10±1 Seconds

Standard Package

100pcs per bag, 1000pcs per box, 4000pcs per carton

Shipping Term:

EXW, DDU, DDP, C&F, FOB

Shipping Methods:

International Express, By Air, By Sea

Selection of the Fuse and Holder Solution

The first step is to answer the following questions:

• Will the fuse need to accessible for replacement?
• How often will the fuse need to be replaced?
• Should the end customer of the appliance have access to change the fuse?
• Should the fuse only be accessible from outside the appliance?
• How much is available to spend on safety and reliability?

5.1.2. Requirements and characteristics

The most important standards for fuse-holders, which specify requirements, characteristics and testing methods are:

• IEC-publication 257 (1968) and Amendment no. 2 to this publication dated January 1989.
• UL-standard no. 512.

• 
• Company warehouse
•