100% Polyester Woven Warp Knitted Woven Fusible Interlining High Bonding Adhesive Interlining Fabric For Casual Coat

A warp-knitted fabric made of a group of yarns is called a single-carded warp-knitted fabric, in which each coil is essentially made from a single yarn. Double - comb warp - knitted fabrics are woven from two combs. Such as the comb before the pile tissue pad, after the comb to the flat tissue pad, this double comb warp knitting organization is called the velveteen organization. Each coil of double-carded warp knitted fabric is basically woven from two yarns, and the coil structure is stable and the surface is flat. Multi-comb warp knitted fabrics usually consist of two combs woven into the ground to give the fabric the desired properties, while the rest of the combs go through the warp to form a pattern on the ground. There are two types of warp knitted fabrics: single - sided and double - sided. A single side warp knitting fabric is woven in a single bed warp knitting machine, consisting of coils on one side and extensions of the coils on the other side. Double-sided warp knitted fabrics are woven in a two-needle bed warp knitting machine, consisting of coils on both sides of the fabric with the extension of the coils in between. There are many kinds of warp-knitted fabrics, such as underwear, outerwear, curtains and lace. They are also widely used in industry, agriculture and health care.

The weaving principle

The yarn is wound on the warp axes, which are located behind and above the braiding area, and all the yarn is fed into the braiding area at the same time. Each yarn is controlled by a separate needle during the socket. However, the guide comb controls the position of the yarn, and the needle used may change each time it is made into a loop. Jacquard mechanisms can be used to implement needle control to produce warp knitted fabrics of complex patterns. In view of the process used in warp knitting, the position of the yarn supply device and the mutual socket between parallel yarns, etc.