Innovative pickling solution continuous pickling line

/ Continuous pickling line

The pickling section is divided into three sections, and the pickling tank is made of PPH by welding. The bottom of the tank and the contact part of the strip steel are laid with andesite. The internal width is 1.7m, and the thickness of the main PPH plate is 40mm. Respectively by pickling tank, circulation system, heating system, detection system. The tank is provided with acid inlet, liquid return port, sewage outlet. The tank cover is PPH structure, double layer structure, sealed with the tank by water seal structure; The tank cover is provided with an acid mist exhaust duct, through which the waste acid mist is sent to the acid regeneration system for treatment.

Cleaning section stage 5 stages

Length each section is about 2500mm

Internal width about 1800 mm

Tank cover PPH

Injection beams 25pcs

Desalinized water spray anti-rust device

Injection beams 25pcs

Services Commitments:

No matter what kinds of products and services, only condition that being sold by JJRS, either production line, single equipment, component, spare parts, or technology service etc., perfect and timely after-sale service will surely be provided. Which is to say, when you use the high quality products of us, simultaneously you will enjoy perfect and timely after-sale service.

For this aim, we formally announce the following commitment:

1.Quality warranty: 1 year, within this period, you can enjoy technical supports from our appointed engineers; meanwhile, free repair and replacement will be provided by our technicians regarding the defects of equipment design, manufacture and quality;

2.Lifetime maintenance: we will provide lifetime maintenance service for all sold products, at the same time, provide spare parts at the cost prices;

3.Service visit periodically: even after warranty, periodical service visits will be arranged for routine checks, with the object to know the operation status and maintenance of equipments, and instruct if necessary;

4.Failure treatment: if any failure occurs regarding equipment, when being acknowledged by the customer, reply will be made within 6 hours, technicians will be sent to the site within 24 hours if necessary;

5.Spare parts: considering the easy consuming components and parts in the production process, spare parts warehouse has already set up, which can response the needs of clients in time;

6.Value added services: we will help clients to update the relevant technologies associated with our products.