Auto Start 100KW 125KVA 3 Phase Biogas CHP 400/230V Renewable Energy Green Energy CE Approved
Biogas is well known as clean energy, biogas CHP solved the problem of livestock waste, reduce greenhouse gas emissions, generate both electricity and heat, with high overall efficiency to achieve maximum utilization of resources.
CONSTITUENT PARTS
SevenPower standard CHP units all adopt closed loop circulation, liquid - liquid heat exchange cooling method.The closed loop cooling system consists of the following parts:
- expansion water pot
- water pump
- engine internal water channel
- thermostat
- liquid - liquid heat exchanger
- corrugated metal pipes
- water cooled exhaust pipe
CHP Main Specifications
Model | SP110B | |
fuel | — | Biogas |
marks | — | Synchro CHP |
electrical output(KWe) | kVA/kWe | Continuous Power |
125/100 | ||
thermal output(KWe) | kWt | 175 |
electrical efficiency | % | 29.7% |
thermal efficiency | % | 52% |
overall efficiency | % | 81.7% |
frequency | Hz | 50 |
voltage | V | 400/230 |
gas inlet pressure | kPa | 1-10 |
dimension (soundproof type) | mm*mm*mm | 2600*1550*1650 |
net weight | kg | 3000 |
Biogas consumption | m3/kW.h | 0.47 |
Biogas consumption for one hours | m3/h | 47 |
db(A)@7m | — | 58 |
Certificate | — | CE |
water-water heat exchanger | — | SWEP |
water-exhaust heat exchanger | — | made of stainless steel |
ignition system | — | Impco |
speed governor | — | Woodward |
gas filter | — | Madas |
zero regulator | — | Kromschroeder |
MCB | — | ABB |
GCB | — | ABB |
Controller | ComAp | |
Engine model | — | SP-6LTA |
Engine type | — | 6 cylinders,4stroke,water-coolled |
RPM | — | 1500 |
Compression Ratio | — | 10.5 |
Displacement | — | 8.9L |
Oil capacity | — | 27L |
Charging voltage | — | 24V(DC) |
Charging current | — | 5A(DC) |
Starting system | — | Electic-start |
Alternator model | — | Meccalte |
phase | — | 3 phase 4 wires |
insulation system | — | class H |
protection | — | IP23 |
Cooling Type | — | air cooled |
Characters
Environmentally friendly design.
Long time R&D and testing ensure high reliability.
Comprehensive heat insulation to minimize heat loss.
CHP inner pipelines are made of full stainless steel material.
Maximum lower the noise level.
Maintenance friendly thanks to easy access.
Biogas Requirements
Composition | Content |
CH4 | ≥55% |
fluctuations value of biogas in pipeline | <0.2Kpa |
hydrogen | <10% |
sulfide, including hydrogen sulphide | <200mg/m3 |
chlorine fluorine compounds,mainly chlorofluoromethane | <15mg/m3 |
silicium | <0.7mg/m3 |
ammonia | <15mg/m3 |
liquid oil and hydrocarbons | <50mg/m3 |
particles | <5μm Impurity content<30mg/m3 |
Biogas CHP On-site Picture(Installed In Year 2013)
For more information about each CHP, please consult with your sales representative.Thanks.
More Information About Our Factory
Our Packing
Our Hannover Exhibition
Our Showroom In Germany
Our Customers' Visiting