60HZ 110V / 220V 140KW AC 3 Phase Natural Gas CHP Silent CHP Power Plant Distributed Power System
SevenPower CHP applications are where there is a demand for both electricity and hot water or heating.
● Houses
● Apartment Buildings
● Office blocks
● Commercial Buildings
● Spas
● Hotels
● Bakeries
● Breweries
● Schools
● Gyms
● Fire stations
● Dairies
● Leisure Centers
● Sauna
● Hospitals
● Swimming Pools
● Zoos
● Stables
● Meat factory
● Pig farm
......
Different Applications
STORAGE TIME / RECOMMENDED SERVICE PROCEDURE TO PREVENT HARD STARTING
Less than 1 month
- Drain all CHP water.
More than 1 month
- Change engine oil.
- Remove the spark plug, and pour about a tablespoon of clean engine oil into the cylinder. Crank the engine several revolutions to distribute the oil, then reinstall the spark plug.
- Slowly pull the starter grip until resistance is felt. At this point, the piston is coming up on its compression stroke and both the intake and exhaust valves are closed. Storing the engine in this position will help to protect it from internal corrosion.
Main Specifications
Item | Model | SP140N | |
fuel | — | Natural Gas | |
marks | — | Synchro CHP | |
CHP | electrical output(KWe) | kVA/kWe | Continuous Power |
175/140 | |||
thermal output(KWt) | kWt | 197.5 | |
electrical efficiency | % | 34.4% | |
thermal efficiency | % | 48.5% | |
overall efficiency | % | 82.9% | |
frequency | Hz | 60 | |
voltage | V | 440/254 | |
gas inlet pressure | kPa | 3-5 | |
dimension (soundproof type) | mm*mm*mm | 2800*1550*1650 | |
net weight | kgs | 2600 | |
NG consumption | m3/kW.h | 0.295 | |
standard type-db(A)@7m | — | 58 | |
Certificate | — | CE | |
water-water heat exchanger | — | SWEP | |
water-exhaust heat exchanger | — | designed by our own factory/made of full stainless steel | |
ignition system | — | Impco | |
speed governor | — | Woodward or Hainzmann | |
mixer | — | Venturi type | |
gas filter | — | Madas | |
zero regulator | — | Kromschroeder | |
Lambda auto control | — | Available on request | |
emission standard | — | Available on request | |
MCB | — | ABB | |
GCB | — | ABB | |
Controller | ComAp IC | ||
Engine | Engine model | — | MT07 |
Engine type | — | 6 cylinders,4stroke,water-coolled | |
RPM | — | 1800 | |
Compression Ratio | — | 11.0 | |
Displacement | — | 6.87L | |
Oil capacity | — | 26L | |
Charging voltage | — | 24V(DC) | |
Charging current | — | 5A(DC) | |
Starting system | — | Electic-start | |
Alternator | model | — | Meccalte |
phase | — | 3 phase 4 wires | |
insulation system | — | class H | |
protection | — | IP23 | |
Cooling Type | — | air cooled |
For more information about each CHP, please consult with your sales representative.Thanks.
More Information About Our Factory
Our Packing
Our Hannover Exhibition
Our Showroom In Germany
Our Customers' Visiting