Biogas Genset 50KW 60KVA Green Energy CE Certification 50HZ
The generator may be required to operate for long periods of time without an operator on hand to monitor such engine conditions as coolant temperature, oil pressure or rpm. For that reason, the engine has several devices designed to protect it against potentially damaging conditions by automatically shutting down the unit when the oil pressure is too low, the coolant temperature is too high, the coolant level is too low, or the engine is running too fast.
Characters
Design & Research team : Team with rich experience more than 10years.
Feature : Specially designed valves,crankshaft,camshaft,pistons,ignition system and combustion chamber for gas engine,
Rapid response to your needs : answer within 24 hours.
Standard : All of our models are certified with CE.
Main Specifications
Model | SP50B | |
fuel | — | Biogas |
marks | — | Synchro Genset |
electrical output(KWe) | kVA/kWe | Continuous Power |
62/50 | ||
frequency | Hz | 50 |
voltage | V | 400/230 |
gas inlet pressure | kPa | 1-10 |
dimension (soundproof type) | mm*mm*mm | 2500*1400*1600 |
net weight | kg | 2000 |
Biogas consumption | m3/kW.h | 0.48 |
Biogas consumption for one hours | m3/h | 20 |
db(A)@7m | — | 58 |
Certificate | — | CE |
ignition system | — | Impco |
speed governor | — | Woodward |
gas filter | — | Madas |
zero regulator | — | Kromschroeder |
MCB | — | ABB |
GCB | — | ABB |
Controller | ComAp | |
Engine model | — | SP-6BTA |
Engine type | — | 6 cylinders,4stroke,water-coolled |
RPM | — | 1500 |
Compression Ratio | — | 10.5 |
Displacement | — | 5.9L |
Oil capacity | — | 17L |
Charging voltage | — | 24V(DC) |
Charging current | — | 5A(DC) |
Starting system | — | Electic-start |
model | — | Meccalte |
phase | — | 3 phase 4 wires |
insulation system | — | class H |
protection | — | IP23 |
Cooling Type | — | air cooled |
For more information about each CHP, please consult with your sales representative.Thanks.