3P3W Asynchro 8KW 10KVA CHP With Water Cooled Alternator Grid-on Cogeneration 60HZ Single Phase 10KW CHP 10KW COGEN
Recover heat from 4 sources
- Engine jacket water
- Alternator cooling water
- Exhaust
- Exhaust manifold
Main Specifications
Model | SP9N | |
fuel | — | Natural Gas |
marks | — | A-synchro CHP |
electrical output(KWe) | kVA/kWe | Continuous Power |
10/8 | ||
thermal output(KWt) | kWt | 20.4 |
electrical efficiency | % | 25.6% |
thermal efficiency | % | 65.3% |
overall efficiency | % | 90.9% |
frequency | Hz | 50 |
voltage | V | 400/230 |
gas inlet pressure | kPa | 1-10 |
Water Flow | m³/h | 2 |
dimension (soundproof type) | mm*mm*mm | 1530*750*940 |
net weight | kgs | 550 |
NG consumption | m3/kW.h | 0.396 |
Certificate | — | CE |
water-water heat exchanger | — | SWEP |
water-exhaust heat exchanger | — | designed by our own factory/made of full stainless steel |
ignition system | — | Impco |
speed governor | — | Woodward |
gas filter | — | Madas |
zero regulator | — | Maxitrol |
pressure gauge | — | DUNGS |
soft start | — | ABB |
switch | — | ABB |
lambda control | — | Available on request |
catalyst converter | — | Available on request |
ComAp | ||
Engine model | — | SP9EW |
Engine type | — | 4 cylinders,4stroke,16valves,water-coolled |
RPM | — | 1500 |
Compression Ratio | — | 11 |
Displacement | — | 1.5L |
Oil capacity | — | 3.9L |
Charging voltage | — | 12V(DC) |
Charging current | — | 6A(DC) |
Starting system | — | Electic-start |
model | — | SP9AW |
phase | — | 3 phase |
insulation system | — | class H |
protection | — | IP65 |
Cooling Type | — | water cooled |
max return temp | ℃ | 70 |
Asynchronous 8kw CHP on Site Picture
For more specifications about the CHP, please consult with your sales representative.Thanks.