presentation

Automated VOC Treatment After Oil Pumps,Exhaust Gas Treatment System,

VOCs (volatile organic compounds) are harmful gases emitted from various industrial processes, including the oil industry. The treatment of VOCs is necessary to protect the environment and human health. After oil pumps, VOCs may be emitted into the atmosphere, so it is necessary to take measures to treat them.

One common method of VOC treatment is adsorption. Adsorption is a physical process in which VOCs are adsorbed onto a solid adsorbent. Activated carbon is a widely used adsorbent for VOC treatment. It has a large specific surface area and pore volume, which can adsorb a variety of organic gases effectively. After the VOCs are adsorbed, they can be removed from the adsorbent by thermal desorption or catalytic oxidation.

Another method of VOC treatment is absorption. In this process, VOCs are dissolved in a liquid absorbent, such as aqueous solutions of caustic soda or caustic potash. The absorbed VOCs can be recovered from the absorbent by distillation or other methods.

VOCs are volatile organic compounds. The ordinary sense of VOCs is to refer to volatile organic compounds; but the definition of environmental protection is to refer to a lively class of volatile organic compounds, that is, will produce harm to the class of volatile organic compounds.

Post-pump VOC treatment is volatile organic compounds (VOCs) treatment equipment at the pump outlet.
Suitable for industries such as petroleum and chemical, printing and packaging, automotive manufacturing and repair, coatings and paints, electronics and semiconductors

VOCs waste gas treatment technology - adsorption method

The adsorption method in organic waste gas is mainly applicable to low concentration and high flux organic waste gas. At this stage, this organic waste gas treatment method has been quite mature, the energy consumption is relatively small, but the treatment efficiency is very high, and it can completely purify the harmful organic waste gas. Practice has proved that this treatment method is worth popularizing and applying. The key to using this method of waste gas treatment lies in the adsorbent. Currently, the use of adsorption method to deal with organic waste gas, the use of activated carbon, mainly because of the activated carbon pore structure is better, stronger adsorption.

An adsorber is a device equipped with an adsorbent that enables gas-solid or liquid-solid adsorption and desorption processes. Its main purpose is to separate certain components of gases or liquids or to remove harmful substances from them. The adsorber is usually equipped with a porous adsorbent inside, such as molecular sieve, activated carbon and so on.

When the gas or liquid passes through the adsorber, the components therein will be adsorbed by the adsorbent, thus realizing the purpose of separation or purification. The adsorbent can selectively adsorb certain components, e.g. water, carbon dioxide, nitrogen, etc. The desorption process, on the other hand, releases the adsorbed components from the adsorbent and restores the adsorption capacity of the adsorbent.

There are various types and forms of adsorbers, which can be categorized into axial flow adsorbers and radial flow adsorbers according to the different directions of gas flow. In industrial applications, adsorbers are mainly used in the fields of gas separation, purification, purification and recovery.

In addition, there are adsorbers utilizing electrostatic membranes, which are mainly used to extract footprints on rigid planes. The principle is to use the electric field force of the electrostatic field to adsorb the dust footprint on the electrostatic membrane, so as to realize the extraction.

For more information about "adsorbers", you can refer to the relevant materials or consult professionals.