wireless addressable heat detector home fire detector high-precision thermistor sensor

Product Introduction:

JTW-ZOM-TC5402W wireless addressable heat detector (hereinafter referred to as the detector) is a smart home fire detector that uses a high-precision thermistor as the sensor. It can be used with the company’s wireless fire alarm control panel /wireless fire linkage control panel (hereinafter referred to as the device) for supporting use. The detector utilizes advanced wireless transceiver technology and a highly integrated micro-processing chip to process data. It has the characteristics of high sensitivity, long transmission distance, and low power consumption. It can accurately and quickly detect changes in ambient temperature, determine fire and call the police.

This product has beautiful appearance design, convenient and reliable installation, and is suitable for places where smokeless fires may occur, a large amount of dust or smoke and steam are trapped under normal circumstances. This product is widely used in various residential buildings. The fire can be detected as early as possible, and the people's lives and property can be protected to the greatest extent.

Features

1. Using advanced wireless transceiver technology, signal transmission can be completed without wiring, and the project is simple and convenient.

2. Using 470MHz frequency band communication, FSK coding technology, strong anti-interference ability, long transmission distance;

3. With battery low-voltage detection, remind users to replace when the battery is insufficient to maintain the detector's normal operation.

4. The use of high-sensitivity thermal elements improves the response speed of the temperature detector to temperature changes.

Main technical specifications

1. Type:A2R

2. Battery type: CR17450 3V

3. Working Current: Standby Current≤3uA

Alarm Current≤18mA

4. Indicators:Fire Indicator:red, always on when it alarms

Fault Indicator:yellow,flash twice every 48s when the battery is undervoltage. Periodic flashing when communication fails after entering the network

5.Working Indicator:Green, flashing periodically when the communication is normal after entering the network Coding method:The control panel is automatically assigned during networking

6.Communication method:470MHz FSKCoded two-way communication

7.Communication distance:≤50m

8.Transmitting power: <20dBm

9. Frequency band:470MHz

10.Atmosphere pressure:86kPa～106kPa

11.Temperature:-10℃～+50℃

Relative humidity≤95%,non-condensing

12. Dimensions: diameter 100mm, high 54mm (with base)

13. Protection grade: IP30

14. Material and color: ABS, off-white

15. Weight: about 110g (including battery)

16. Installation hole distance: 60mm

17. Executive standard: GB 4716-2005 "Point Type Temperature Sensing Fire Detector"

XF 1151-2014 "General Requirements for Wireless Communication Function of Fire Alarm System"

Fault and Abnormal information processing and Regular Check

Photos

Company Profile

Henan Weiguo Intelligent Technology Co., LTD., founded in 2015, is an important subsidiary of Hanwei Electronics Group Corporation (Stock no.:300007) in the field of intelligent healthy, safe home and IoT business. Henan Weiguo Intelligent Technology Co., LTD., relying on the core sensor technology, focuses on gas and smoke alarm, air quality monitor, alcohol tester and firefighting products. Based on introduction of featured technology from both Hanwei Electronics Group Corporation and abroad, Henan Weiguo intelligent Technology Co., LTD., has developed into an innovative company with the collection of design, R&D development, production, sales and service. We will always be committed to becoming the leader in intelligent hardware, providing safe, healthy, environmentally friendly and intelligent working and living environment for families and users all over the world.

FAQ
Q1: Are you manufacturer?
A: (yes)
Q2: What is the lead time?
A: usually
Fire control: one week working day
bulk quality: three weeks working days
Emergency lights: two weeks working days
bulk quality: four weeks
Q3: How do you ship the goods and how long does it take arrive?
A: We usually ship by DHL, UPS, FedEx or by Air. 3-5 days after payment received.
Q4: Can I have a sample order?
A:Yes,we welcome sample order to test and check quality.
Q5: Do you offer OEM service?
A: Yes, we can design the device according to your request.