North American Tempest High Velocity Gas Burner
The 4441 model Tempest has gained acclaim for its high velocity jet action and superior recirculation promoting capabilities.
These two features bring both the quality benefit of close temperature uniformity and the productivity benefi t of safe higher
heating rates up to 1650°C (3000°F).
Additionally, a variety of tile material and outlet shape choices provide fl exibility in installation with a “flame fitting” to the shape
of the combustion chamber.
Combustion Air | 0.08-10.3 kPa (0.3-41.6"w.c.) air pressure, max 177°C (350°F) |
Fuel | Natural gas with propane gas versions available in the -1 thru -4-B sizes. Gas pressure varies per size with 4.7 kPa (19"w.c.) is maximum required at design capacity, for 6.9 KPA (27.7"w.c.) combustion air pressure, stoich ratio. |
Flame Supervision | Flame rod or UV detector Consult National Safety Standards and insurance underwriters for specific flame supervision requirements. |
Control | Excellent performance with all control systems |
Air Flow, not burning | 219Nm3/h |
Gas Pressure UG | 39.2mbar |
TYPES OF APPLICATIONS
— Periodic kilns in the ceramics and refractory industries
— Tunnel kilns in the ceramics and refractory industries
— Forge furnaces
— Heat treat furnaces
— Galvanizing baths
— Scrap preheaters
— Carbon baking furnaces
— Cupolas
— Pipe coaters
— Portable refractory dry out
— Preheat equipment
— Variety of other applications
PERFORMANCE BENEFITS
— Low NOx emissions
— High excess air and excess fuel
— Direct spark ignition
— Integral air and gas meters
— Sturdy cast construction
— Wide operating limits
— Range of ignition and flame supervision capabilities
— Compatible with StepFire or other pulse fired control system.