Fullde AC415V 35KW Power Factor 1.0 Electrical Testing Load Bank for Generator
1. Technical standards
FULLDE provide the equipment and accessories which meet the following standards, but not limited to the following criteria:
1) National standards: GB/T 14048.1-2000
Low-voltage switchgear and control equipment
2) National standards: GB/T 7251-2005
Low-voltage complete switch and control equipment
3) Industry standard: JB/T 9696.1-1999
Low-voltage complete switch and control equipment with terminal row
4) IEC 60034 Rotating Electrical Machines
5) IEC 60364 Low Voltage Electrical Installations
6) IEC 60664 Insulation Coordination for equipment within low-voltage systems
7) IEC 60529 Degrees of protection provided by enclosures (IP Code)
8) NFPA 110 Standard for Emergency and Standby Power Systems
2. Conditions
1) Ambient temperature: - 25 ~ 55 ℃
2) The relative humidity: average less than 90%
3) Altitude: ≤2500m
4) The installation conditions: without corrosive or flammable gas, water vapor etc some other
obvious pollution, and without violent vibration.
3. Equipment technical parameter
System Composition | Resistor, air cooling, the electric parameters testing, control panel |
Resistor Element | Special alloy resistance, high temperature resistance, corrosion resistance, high precision, long service life, resistance tolerance is ±5%; |
Connection | The three-phase four wire system, star connection method, copper; |
Control | Contactor |
Control Voltage | 3P4W, 415VAC,50Hz; |
Dimension(mm) | 750*850*1300mm; |
Weight | about 100KG |
Load element type | Pure resistive |
Control | Local manual control; |
Load Tolerance | ±5%; |
Way of Working | Continuous working; |
Cooling type | Force air cooling; |
Insulation grade | F; |
Protection | 1. Emergency Stop: User can press the emergency stop button in the panel to unload immediately when the load bank is abnormal while working; 2. Short Circuit Protection: Fuse could avoids damage to equipment when short circuit or current overload; 3. Fan Air Quantity Protection: when the wind is insufficient, the machine will unload and give alarm; |
Protection Button | there are protection button both in local control and remote control can be switched off when false alarm or for special requirements. |
Protection Grade | IP23; |
Transportation | Rings on the top or caster wheels; |
4. Control Panel Introduction