Container Type 1000KW-400V Generator Load Bank for 800KW Generator

Typical Applications:

1. In the acceptance inspection of load bank, the relevant department have to check whether the new devices fulfill the actual requirement.

2. After the installation of noise reduction devices, the loading capability must be test again.

3. For the routine test & maintenance, it is essential to test the output power and loading capability.

Main features of the generator load bank:

1. Power: 1KW-10MW

2. PF: 0.8-1.0

3. Fans cooling or water cooled

4. Inductive / Resistive or non-inductive

5. Manual/PLC remote control

6. Load steps(by switches) / infinite adjust

7. Current: 0.1A-10000A

8. Working voltage: DC/AC 1V-1000V

9. Value: 0.01Ω-100KΩ

10. Working Environment:
Altitute: ≤2500m
Temperature: -10°C~50°C
Humidity: ≤95%RH
Working Mode: Continuous work

11. IP class: IP20-IP67

12. Nice appearance, reasonable structure;
Good sealing: be able to work under rain, snow, dust, or any other harsh environment.

Introduction of the generator load bank:

Power generator intelligent testing system can accurately test the output power and loading capacity of various generator units,test all the electric parameters including dynamic parameters of generator units,and mainly consists of two parts:testing control and load cabinet,which is used in coordination with host computer thus materializing intelligentization and automatization to complete the testing of all electric parameters of generator unit,meanwhile,charts,curves and testing report are produced,and no manual operation is required(intelligently controlled,manual/automatic may be selected),to provide scientific testing means for large power generator units.

Technical Parameters for reference: