Elevator 22kw Elevator Automatic Rescue Device Elevator Emergency Power Supply
Technical parameters:
* Input voltage: three phase 380V (phase 400V) ± 10%, frequency of 50HZ or 60HZ
* Environment temperature: -30 ℃ ~40 humidity: 30%~75% (non - condensing)
* Storage battery: 48V/12AH
* Output voltage: two-phase AC380V + 10%,50HZ sine wave, the maximum output current of 5A
Emergency power supply ARD dimensions(A long 500Xwide 150Xhigh 500,A long 460Xwide 150Xhigh 430).
Specification for reference:
Model | ARD-10 | ARD-15 | ARD-25 | ARD-30 | ARD-40 | ARD-45 | ARD-60 | ||
Capacity | 7.5HP (5.5KW) | 11HP (8.2KW) | 22HP (16.5KW) | 26HP (22KW) | 35HP (26KW) | 39HP (28KW) | 40HP (32KW) | ||
AC Input | 1-phase | 220Vac/110Vac, single phase input, 50/60Hz ± 10% | |||||||
3-phase | 415V / 220VAC + 15% - 20%, Three Phase Input, 50/60Hz ± 10% | ||||||||
DC Voltage | 48Vdc | 60Vdc | 72Vdc | 84Vdc | 96Vdc | 120Vdc | 144Vdc | ||
Charger Type | Controlled Rectifier CVCC | ||||||||
Charging Time | 10 Hours for 90% of Full Battery Capacity | ||||||||
Inverter | Technology | IGBT based PWM Sine Wave | |||||||
Output Voltage | 1-phase | 220Vac (50Hz) / 110Vac (60Hz) | |||||||
3-phase | 400V / 415V / 200Vac, Three Phase, 50/60Hz ± 0.1Hz | ||||||||
Inverter Efficiency | 85% | ||||||||
Overload | 105% continuous | ||||||||
Harmonic Distortion | <3% on Linear load | ||||||||
Crest Factor | 4:1 | ||||||||
Power Factor | 0.8 | ||||||||
Phase Displacement | 120° ± 1° | ||||||||
Dimension (LxWxD) | 530x400x195mm | 590x458x195mm | |||||||
LCD Display | AC normal, Inverter normal, Batter low, Overload | ||||||||
Protection | Output Overload & Short circuit, DC Under & Over Voltage |
*Specifications are subject to change without prior notice due to constant improvement in design & technology.